1st Khetwadi Lane, Shop No. 8 Mumbai

Duplex 2205 / UNS S32205 Fasteners

Home » Duplex 2205 / UNS S32205 Fasteners
Get a Quote

Duplex S32205 Fasteners, ASTM A479 Duplex S32205 Stud Bolt, UNS S32205 Hex Bolt, ASME SA479 Heavy Hex Nut, DIN 1.4462 Allen Bolt, Grade S32205 Plain Washer, UNS S32205 Spring Washer.

What is meant by Duplex Steel S32205 Fasteners?

The Duplex Steel S32205 Fasteners have nickel, chromium, and molybdenum as part of their chemical makeup. The chemical composition is superb as a result. As a result, these Duplex S32205 Fasteners are both ferritic and austenitic. These UNS S32205 Duplex Fasteners function well because they have quality workability.

Properties of Duplex UNS S32205 Fasteners:

  • ASTM A479 Duplex UNS S32205 Hex Bolt provide enhanced corrosion resistance.  
  • These were created with great strength and easy fabrication in mind. 
  • In salt and brackish water, it exhibits antioxidant properties. These fasteners inhibit stress corrosion cracking (SSC) and localized corrosion in oxidizing and reducing zones. 
  • Its chemical specification has been updated to provide improved corrosion resistance. Due to precipitates of delicate micro components that can develop on its surface at high temperatures exceeding 300 degrees Celsius, it is not advised to use these fasteners in specific applications. 
  • The flexibility of these DIN 1.4462 Threaded Rod is another quality. These Duplex S32205 Fasteners are ductile and have a longer service life. These are also precise in terms of dimensions. 
  • The Duplex UNS S32205 Stud bolts are renowned for having exceptional fatigue resistance. At ambient temperature, the opposite bending stress takes place. 
  • Its yield strength and fatigue limit are pretty similar. For instance, the fatigue strength is reduced because of the relationship between the fatigue strength and the rate of corrosion. 
  • Grade S32205 Heavy Hex Bolts offer significant advantages over commonly produced stainless steel alloys in this instance. 
  • This fastener provides exceptional strength at a nominal temperature, even below zero. The temperature range for the stress-relieving procedure is 525°C to 600°C. This procedure helps to increase resilience in harsh situations. 

About Duplex 2205 / UNS S32205 Fasteners

Specifications of Duplex UNS S32205 Fasteners:

  • ASME SA479 Duplex UNS S32205 Hex Nuts length varies from 3mm to 200mm. 
  • The forms of S32205 Grade Allen bolts are Screws, Nuts, Bolts, and Washers. 
  • The Standards of Duplex UNS S32205 Fasteners are ASTM, BS, DIN, and all International Standards. 
  • These fasteners’ exterior coatings comprise phosphate, hot-dip galvanizing, cadmium, PTFE, Teflon Finish, Zinc Coating, and Xylan Coating. 

Applications of Duplex UNS S32205 Fasteners:

Duplex UNS S32205 Fasteners are used in many industrial sectors. A few of them include the following:

  • Industrial Chemicals 
  • Power plant industries Oil & Gas industries 
  • Shipbuilding Sector 
  • Industries Using Fertilizer 
  • Petroleum Industries 
  • Industries Using Sugar  
  • Concrete Industries 

Additionally, non-permanent couplings may be easily and without causing any harm to the joining components made using Duplex UNS S32205 PTFE Coated Bolts. The most robust and most durable grade of clasps is believed to be duplex UNS S32205. Extreme weather and high temperatures typically call for the employment of these fasteners. 

Specification Of Duplex 2205 / UNS S32205 Fasteners

SpecificationsASTM A479, A182 / ASME SA479, SA182 and DIN, ISO ,JIS ,GB, IS, BS, ASTM and all International Standards
SizeM3 - M100 | 3/6″ - 4″ | Custom Sizes
Fasteners Length3 mm - 200 mm | Custom Sizes
Nuts SizeM3 - M56 | 3/6" to 2" | Custom Sizes
Washers SizeM3 - M56 | 3/6" to 2" | Custom Sizes
DimensionsDIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3
Threads ConfigurationASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads and UNF, BSW, BSF, METRIC, UNC, or as required
FormHex, Threading, Square, Round as per Gauge Etc.
HeadHex, Square, Round, Hex flange, Flat, T-head & Triangular etc.
Neck typeHex, Square, Triangular, Oval & Knurled etc.
Manufacturing ProcessPassivation /plain, Wire Drawing, Cold Heading, Insert tapping, Heat Treatment, Surface Plating, Inspection, Packing.
Surface CoatingBlack Oxide, Cadmium, Galvanized, Teflon, Xylan, Zinc, Others Upon Request
PackingIN BULK: carton, pallet, Small Boxes or customer request
Test CertificateAs per EN 10204 / 3.1 Manufacturer Test Certificate, PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified
CertificationDual Certified As per ASTM & ASME Codes
Delivery timeRegular product : 7-15 days, Custom product : 2-4 weeks

Equivalent Grades Duplex 2205 / UNS S32205 Fasteners

STANDARDUNSWNR.
Duplex Steel 2205S322051.4462

Chemical Composition Duplex 2205 / UNS S32205 Fasteners

Common NameC%Mn%Si%P%S%Cr%Ni%Mo%N%
S322050.0302.001.000.0300.02022.0-23.04.5-6.53.0-3.50.14-0.20

Mechanical Properties Duplex 2205 / UNS S32205 Fasteners

DensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation
7.9 g/cm31402 °C (2555 °F)Psi – 75000 , MPa – 515Psi – 30000 , MPa – 20540 %

Dimensions Of Duplex 2205 / UNS S32205 Fasteners

Duplex Steel Bolts Dimensions Chart :

Nominal Size
or Basic
Product
Diameter

Full-Size Body
Diameter,
E
Width Across Flats,
F
Width Across
Corners, G
Head Height, H BasicRadius of
Fillet, R
Nominal Thread
Length for Bolt
Lengths,
LT
inchmmMaxMinBasic
inch
MaxMinMaxMinBasic
inch
MaxMinMaxMin6 in. and
Shoter
Over
6 in.
1⁄40.250.260.2377⁄160.4380.4250.5050.48411⁄640.1880.150.030.010.751
5⁄160.31250.3240.2981⁄20.50.4840.5770.5527⁄320.2350.1950.030.010.8751.125
3⁄80.3750.3880.369⁄160.5620.5440.650.621⁄40.2680.2260.030.0111.25
7⁄160.43750.4520.4215⁄80.6250.6030.7220.68719⁄640.3160.2720.030.011.1251.375
1⁄20.50.5150.4823⁄40.750.7250.8660.82611⁄320.3640.3020.030.011.251.5
5⁄80.6250.6420.60515⁄160.9380.9061.0831.03327⁄640.4440.3780.060.021.51.75
3⁄40.750.7680.72911⁄81.1251.0881.2991.241⁄20.5240.4550.060.021.752
7⁄80.8750.8950.8521 5⁄161.3121.2691.5161.44737⁄640.6040.5310.060.0222.25
111.0220.9761 1⁄21.51.451.7321.65343⁄640.70.5910.090.032.252.5
1 1⁄81.1251.1491.0981 11⁄161.6881.6311.9491.8593⁄40.780.6580.090.032.52.75
1 1⁄41.251.2771.2231 7⁄81.8751.8122.1652.06627⁄320.8760.7490.090.032.753
1 3⁄81.3751.4041.3452 1⁄162.0621.9942.3822.27329⁄320.940.810.090.0333.25
1 1⁄21.51.5311.472 1⁄42.252.1752.5982.4811.0360.9020.090.033.253.5
1 5⁄81.6251.6581.5912 7⁄162.4382.3562.8152.6161 3⁄321.1160.9780.090.033.53.75
1 3⁄41.751.7851.7162 5⁄82.6252.5383.0312.8931 5⁄321.1961.0540.120.043.754
1 7⁄81.8751.9121.8392 13⁄162.8122.7193.2483.0991 1⁄41.2761.130.120.0444.25
222.0391.964332.93.4643.3061 11⁄321.3881.1750.120.044.254.5
2 1⁄42.252.3052.2143 3⁄83.3753.2623.8973.7191 1⁄21.5481.3270.190.064.755
2 1⁄22.52.5592.4613 3⁄43.753.6254.334.1331 21⁄321.7081.4790.190.065.255.5
2 3⁄42.752.8272.7114 1⁄84.1253.9884.7634.5461 13⁄161.8691.6320.190.065.756
333.0812.9614 1⁄24.54.355.1964.95922.061.8150.190.066.256.5
3 1⁄43.253.3353.214 7⁄84.8754.7125.6295.3722 3⁄162.2511.9360.190.066.757
3 1⁄23.53.5893.4615 1⁄45.255.0756.0625.7862 5⁄162.382.0570.190.067.257.5
3 3⁄43.753.8583.7265 5⁄85.6255.4376.4956.1982 1⁄22.5722.2410.190.067.758
444.1113.975665.86.9286.6122 11⁄162.7642.4240.190.068.258.5

Duplex Steel Stud Bolts Dimensions Chart :

Nominal Size
Diameter, D
inch
Tap End Full
Thread Length,
BM
Umax = 2PMinimum Nut End
Full Thread Length,
Bmin
NominalMin.Max.UNC & NC-5
Thread
UNF Thread8UN ThreadL ≤ 1010
L > 16
1/40.3750.3500.4000.1000.071...0.7501.0001.500
5/160.4690.4400.4980.1110.083--0.8751.1251.625
3/80.5630.5320.5940.1250.083--1.0001.2501.750
7/160.6560.6200.6920.1430.100--1.1251.3751.875
1/20.7500.7080.7920.1540.100--1.2501.5002.000
9/160.8440.8020.8960.1670.111--1.3751.6252.125
5/80.9380.8920.9830.1820.111--1.5001.7502.250
3/41.1.251.0751.1750.2000.125--1.7502.0002.500
7/81.3131.2581.3680.2220.143--2.0002.2502.750
11.5001.4381.5620.2500.167--2.2502.5003.000
1 1/81.6881.6251.7500.2860.1670.2502.5002.7503.250
1 1/41.8751.8131.9380.2860.1670.2502.7503.0003.500
1 3/82.0632.0002.1250.3330.1670.2503.0003.2503.750
1 1/22.2502.1882.3130.3330.1670.2503.2503.5004.000
1 5/82.4382.3752.500----0.2503.5003.7504.250
1 3/42.6252.5632.6880.400--0.2503.7504.0004.500
1 7/82.8132.7502.875----0.2504.0004.2504.750
23.0002.9253.0750.444--0.2504.2504.5005.000
2 1/43.3753.3003.4500.444--0.2504.7505.0005.500
2 1/23.7503.6753.8250.500--0.2505.2505.5006.000
2 3/44.1254.0504.2000.500--0.2505.7506.0006.500
34.5004.4254.5750.500--0.250--6.5007.000
3 1/44.8754.7754.9750.500--0.250--7.0007.500
3 1/25.2505.1505.3500.500--0.250--7.5008.000
3 3/45.6255.5255.7250.500--0.250--8.0008.500
46.0005.9006.1000.500--0.250--8.5009.000

Duplex Steel Nuts Dimensions :

Nominal
Size

inch
Basic Major
Diameter of
Thread
Width Across Flats,
F
Width Across
Corners,
G
Thickness Heavy
Hex Nuts,
H
Thickness Heavy
Hex Jam Nuts,
H1
Maximum Runout of
Bearing Surface to
Thread
Axis, FIM
Heavy HEX NUTSHeavy Hex
Jam Nuts
Specified Proof load
Basic
inch
Min.MaxMin.MaxBasic
inch
Min.MaxBasic
inch
Min.MaxUp to
150,000 psi
150,000 psi
and Greater
All Strength
Levels
1/40.25001/20.4880.5000.5560.57715/640.2180.25011/640.1560.1880.0170.0110.017
5/160.31259/160.5460.5620.6220.65019/640.2800.31413/640.1860.2200.0200.0120.020
3/80.375011/160.6690.6880.7630.79423/640.3410.37715/640.2160.2520.0210.0140.021
7/160.43753/40.7280.7500.8300.86627/640.4030.44117/640.2470.2850.0220.0150.022
1/20.50007/80.8500.8750.9691.01031/640.4640.50419/640.2770.3170.0230.0160.023
9/160.562515/160.9090.9381.0371.08335/640.5260.56821/640.3070.3490.0240.0170.024
5/80.62501 1/161.0311.0621.1751.22739/640.5870.63123/640.3370.3810.0250.0180.025
3/40.75001 1/41.2121.2501.3821.44347/640.7100.75827/640.3980.4460.0270.0200.027
7/80.87501 7/161.3941.4381.5891.66055/640.8330.88531/640.4580.5100.0290.0220.029
11.00001 5/81.5751.6251.7961.87663/640.9561.01235/640.5190.5750.0310.0240.031
1 1/81.12501 13/161.7561.8122.0022.0931 7/641.0791.13939/640.5790.6390.0330.0270.033
1 1/41.250021.9382.0002.2092.3091 7/321.1871.25123/320.6870.7510.0350.0300.035
1 3/81.37502 3/162.1192.1882.4162.5261 11/321.3101.37825/320.7470.8150.0380.0330.038
1 1/21.50002 3/82.3002.3752.6222.7421 15/321.4331.50527/320.8080.8800.0410.0360.041
1 5/81.62502 9/162.4812.5622.8282.9591 19/321.5561.63229/320.8680.9440.0440.0380.044
1 3/41.75002 3/42.6622.7503.0353.1751 23/321.6791.75931/320.9291.0090.0480.0410.048
1 7/81.87502 15/162.8442.9383.2423.3921 27/321.8021.8861 1/320.9891.0730.0510.0440.051
22.00003 1/83.0253.1253.4493.6081 31/321.9252.0131 3/321.0501.1380.0550.0470.055
2 1/42.25003 1/23.3883.5003.8624.0412 13/642.1552.2511 13/641.1551.2510.0610.0520.061
2 1/22.50003 7/83.7503.8754.2754.4742 29/642.4012.5051 29/641.4011.5050.0680.0580.068
2 3/42.75004 1/44.1124.2504.6884.9072 45/642.6472.7591 37/641.5221.6340.0740.0640.074
33.00004 5/84.4754.6255.1025.3402 61/642.8933.0131 45/641.6431.7630.0810.0700.081
3 1/43.250054.8385.0005.5155.7743 3/163.1243.2521 13/161.7481.8760.0870.0750.087
3 1/23.50005 3/85.2005.3755.9286.2073 7/163.3703.5061 15/161.8702.0060.0940.0810.094
3 3/43.75005 3/45.5625.7506.3416.6403 11/163.6163.7602 1/161.9902.1340.1000.0870.100
44.00006 1/85.9256.1256.7557.0733 15/163.8624.0142 3/162.1122.2640.1070.0930.107

Duplex Steel Washer Dimensions Chart :

Nominal SizeTClipped Width E, Min.
I.D.O.D.StandardExtra Thick
[Note (1)]Max.Min.Max.Min.Max.Min.Max.Min.[Note (2)]
1214.4142725.74.63.110810.5
1618.4183432.44.63.110814
2022.5224240.44.63.110817.5
2224.5244442.44.63.410819.2
2426.5265048.44.63.410821
2730.53056S4.14.63.410823.6
3033.6336058.14.63.410826.2
3639.6397270.14.63.410831.S
4245.6458481.87.24.610836.7
4852.7529592.87.24.610842
5662.762107104.88.76.110849
6470.770118115.88.76.110856
7278.778130127.58.76.110863
8086.986142139.58.76.110870
9096.996159156.58.76.110878.7
100107.9107176173.58.76.110887.5

Different Types Of Duplex 2205 / UNS S32205 Fasteners

Different Types Of Bolts
Different Types Of Studs Bolts
Different Types Of Nuts
Different Types Of Washer
Different Types Of Screw

Application of Duplex 2205 / UNS S32205 Fasteners

Testing of Duplex 2205 / UNS S32205 Fasteners

Packing of Duplex 2205 / UNS S32205 Fasteners

Destination Of Duplex 2205 / UNS S32205 Fasteners

Duplex S32205 Allen Bolt Exporter in Pune, Duplex S32205 Lag Bolt Manufacturer in Hyderabad, ASTM A182 Duplex S32205 Hex Bolt Manufacturer in Bengaluru, Duplex S32205 Square Bolt Stockist in Dammam, Duplex S32205 Stud Bolt Stockist in Pimpri-Chinchwad, Din 1.4462 Head Hex Nut Stockist in Bangalore, ASME SA182 Duplex S32205 Industrial Fasteners Exporter in Nashik, UNS S32205 Hot Forged Bolts Supplier in Vadodara, ASTM A479 Duplex S32205 high tensile Bolts Manufacturer in Bharuch, Din 1.4462 Hex nut Exporter in Hyderabad, Din 1.4462 Carriage Bolt Exporter in Dubai, Duplex S32205 Steel Bolt Supplier in Coimbatore, ASME SA479 Duplex S32205 Spring washer Stockist in Ahmedabad, ASTM A182 Duplex S32205 Heavy Hex Bolt Supplier in Chennai, Duplex S32205 U Bolt Supplier in Abu Dhabi, UNS S32205 Plain Washer Manufacturer in Mumbai.
UNS S32205 Hot Forged Bolts Supplier in Vietnam, ASME SA182 Duplex S32205 Industrial Fasteners Exporter in Oman, Duplex S32205 Stud Bolt Stockist in UK, Duplex S32205 Lag Bolt Manufacturer in Indonesia, Din 1.4462 Head Hex Nut Stockist in South Africa, Din 1.4462 Hex nut Exporter in Kuwait, Duplex S32205 U Bolt Supplier in UK, Duplex S32205 Allen Bolt Exporter in Qatar, UNS S32205 Plain Washer Manufacturer in Singapore, Duplex S32205 Square Bolt Stockist in Italy, ASTM A182 Duplex S32205 Heavy Hex Bolt Supplier in UAE, ASTM A479 Duplex S32205 high tensile Bolts Manufacturer in Australia, ASTM A182 Duplex S32205 Hex Bolt Manufacturer in USA, Duplex S32205 Steel Bolt Supplier in Saudi Arabia, ASME SA479 Duplex S32205 Spring washer Stockist in Malaysia, Din 1.4462 Carriage Bolt Exporter in Canada.
Get UNS S32205 Head Hex Nut Chemical Composition, A wide range of Duplex S32205 Fasteners Size Chart, Duplex S32205 Grade Fastener Price Per Kg, Din 1.4462 Hex Bolt Weight Calculator, Buy Duplex S32205 Stud bolts, Best Quality of S32205 Grade Bolts, ASTM A182 Duplex S32205 Weight Chart, UNS S32205 Duplex Fasteners Price List In India, Austenitic S32205 Duplex Nuts, Duplex S32205 Heavy Hex Bolt Dimension PDF, Duplex S32205 Anchor Bolt Price List, ASME SA479 Duplex S32205 Square Bolt Catalogue, Get Quote Now of S32205 Fasteners At Factory Price.