1st Khetwadi Lane, Shop No. 8 Mumbai

Hastelloy C276 Bolt

Home » Hastelloy C276 Bolt
Get a Quote
Shree Ashapura Steel Centre Manufacturer supplier of SS , High nickel and Duplex / Super duplex Fasteners, for enquiry contact on email: info@shreeashapurasteel.com

Hastelloy C276 U Bolt, Alloy C276 Anchor Bolt, ASME SB574 Hastelloy C276 Hex Head Bolt, WNRF 2.4819 Stud Bolt, Hastelloy Alloy C276 Allen Bolt, UNS N10276 Flange Head Bolt, ASTM B574 Hastelloy C276 Hex Bolt

What is meant by Hastelloy C276 Bolts?

An alloy of nickel, molybdenum, and chromium known as Hastelloy C276 is created as forged material. Bolts of this alloy are among the most adaptable constructed of alloy material globally. Hastelloy C276 Bolts are produced in various shapes, sizes, and specifications. The lowest yield strength and reinforcing steel strength of the material are 379 MPa and 758 MPa, respectively, with an elongation rate of up to 60. 

Offshore oil drilling, power generation, petrochemicals, gas processing, specialized pharmaceuticals, medications, chemicals, seawater applications, heat exchangers, condensers, and many more uses are just a few examples of the various applications.

Properties of Hastelloy C276 Bolts:

The arduous and upsetting situations, such as acidic, basic, salty, and salt-water environments, are suitable for using Hastelloy C276 Hex bolts and nuts. Plants that produce acetic acid and organic acids employ Grade C276 Allen bolts. Strong oxidizers don’t harm the material’s outstanding acidity resistance. Alloy C276 bolts may tolerate both ferric and cupric chlorides. The C276 Bolts have extreme resistance to pitting and trench corrosion as a result of this particular combination. 

C276 Hastelloy Countersunk Bolts are acceptable for most chemical process applications in their as-welded state because they are resistant to producing intergranular crystallites in the joint heat-affected zone. They are employed in various situations, from strongly reducing to mildly oxidizing. Due to its exceptional resistance to Sulphur compounds and chloride ions seen in most scrubbers, Hastelloy C276 Square Bolts are utilized to desulfurize flue gas systems. To prevent excessive heat input, Factories should take particular care.

About Hastelloy C276 Bolt

Characteristics of Hastelloy C276 Bolts:

  • The specification of C276 Hastelloy Torx Bolt is ASTM B 574, UNS N10276 and ASME SB 574 Bolts.
  • The length of UNS N10276 Steel Bolts ranges from 3 mm to 200 mm.
  • The size of DIN 2.4819 Carriage Bolts varies from M02 to M33.

Testing of Hastelloy C276 Bolts:

Hastelloy C276 PTFE Coated Bolts are professionally inspected and analyzed at every stage of manufacture to guarantee a product free of flaws and errors. These tests include that hardness, mechanics, chemical analysis, pit resistance, ultrasonic, and flattening. The radiography, the flare, the PMI, the tensile and flexural, and the IGC tests are further tests.

Applications of Hastelloy C276 Bolts:

Hastelloy C276’s high molybdenum content improves its resistance to corrosion caused by pitting and cracking. This metal is used in sewage fluid treatment systems when other metals cannot endure harsh conditions. Accelerated corrosion and cracking resistance cracking are two things to which it is incredibly resistant. ASTM B574 Hastelloy C276 Bolts are frequently used in several commercial applications, which is not surprising given their wide variety of long-lasting characteristics that improve them.

Sectors and Applications of Hastelloy C276 Bolts:

  • Chemical Transformation 
  • Power Generation from Oil and Gas 
  • Pumps, Valves, and Seals for Pulp and Paper Mills 
  • Systems for Water 

Specification Of Hastelloy C276 Bolt

SpecificationsASTM B564, ASME SB564 and DIN, ISO ,JIS ,GB, IS, BS, ASTM and all International Standards
SizeM3 - M100 | 3/6″ - 4″ | Custom Sizes
Length3 mm - 200 mm | Custom Sizes
DimensionsDIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3
Threads ConfigurationASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads and UNF, BSW, BSF, METRIC, UNC, or as required
FormHex, Threading, Square, Round as per Gauge Etc.
HeadHex, Square, Round, Hex flange, Flat, T-head & Triangular etc.
Neck typeHex, Square, Triangular, Oval & Knurled etc.
Manufacturing ProcessPassivation /plain, Wire Drawing, Cold Heading, Insert tapping, Heat Treatment, Surface Plating, Inspection, Packing.
Surface CoatingBlack Oxide, Cadmium, Galvanized, Teflon, Xylan, Zinc, Others Upon Request
PackingIN BULK: carton, pallet, Small Boxes or customer request
Test CertificateAs per EN 10204 / 3.1 Manufacturer Test Certificate, PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified
CertificationDual Certified As per ASTM & ASME Codes
Delivery timeRegular product : 7-15 days, Custom product : 2-4 weeks

Equivalent Grades Hastelloy C276 Bolt

STANDARDUNSWERKSTOFF NR.AFNORENJISORGOST
Hastelloy C276N102762.4819-NiMo16Cr15WNW 0276ЭП760ХН65МВУ

Chemical Composition Hastelloy C276 Bolt

GradeCMoMnSiFePSCoCrWVNi
C2760.0115.0 – 17.01.00.084.00 – 7.000.040.032.514.5 – 16.53 – 4.50.35Bal

Mechanical Properties Hastelloy C276 Bolt

GradeDensityMelting PointYield Strength (0.2%Offset)Tensile StrengthElongation
C2768.89 g/cm31370 °C (2500 °F)Psi – 52,000 , MPa – 355Psi – 1,15,000 , MPa – 79040 %

Dimensions Of Hastelloy C276 Bolt

High Nickel Alloys Bolts Dimensions Chart :

Nominal Size
or Basic
Product
Diameter

Full-Size Body
Diameter,
E
Width Across Flats,
F
Width Across
Corners, G
Head Height, H BasicRadius of
Fillet, R
Nominal Thread
Length for Bolt
Lengths,
LT
inchmmMaxMinBasic
inch
MaxMinMaxMinBasic
inch
MaxMinMaxMin6 in. and
Shoter
Over
6 in.
1⁄40.250.260.2377⁄160.4380.4250.5050.48411⁄640.1880.150.030.010.751
5⁄160.31250.3240.2981⁄20.50.4840.5770.5527⁄320.2350.1950.030.010.8751.125
3⁄80.3750.3880.369⁄160.5620.5440.650.621⁄40.2680.2260.030.0111.25
7⁄160.43750.4520.4215⁄80.6250.6030.7220.68719⁄640.3160.2720.030.011.1251.375
1⁄20.50.5150.4823⁄40.750.7250.8660.82611⁄320.3640.3020.030.011.251.5
5⁄80.6250.6420.60515⁄160.9380.9061.0831.03327⁄640.4440.3780.060.021.51.75
3⁄40.750.7680.72911⁄81.1251.0881.2991.241⁄20.5240.4550.060.021.752
7⁄80.8750.8950.8521 5⁄161.3121.2691.5161.44737⁄640.6040.5310.060.0222.25
111.0220.9761 1⁄21.51.451.7321.65343⁄640.70.5910.090.032.252.5
1 1⁄81.1251.1491.0981 11⁄161.6881.6311.9491.8593⁄40.780.6580.090.032.52.75
1 1⁄41.251.2771.2231 7⁄81.8751.8122.1652.06627⁄320.8760.7490.090.032.753
1 3⁄81.3751.4041.3452 1⁄162.0621.9942.3822.27329⁄320.940.810.090.0333.25
1 1⁄21.51.5311.472 1⁄42.252.1752.5982.4811.0360.9020.090.033.253.5
1 5⁄81.6251.6581.5912 7⁄162.4382.3562.8152.6161 3⁄321.1160.9780.090.033.53.75
1 3⁄41.751.7851.7162 5⁄82.6252.5383.0312.8931 5⁄321.1961.0540.120.043.754
1 7⁄81.8751.9121.8392 13⁄162.8122.7193.2483.0991 1⁄41.2761.130.120.0444.25
222.0391.964332.93.4643.3061 11⁄321.3881.1750.120.044.254.5
2 1⁄42.252.3052.2143 3⁄83.3753.2623.8973.7191 1⁄21.5481.3270.190.064.755
2 1⁄22.52.5592.4613 3⁄43.753.6254.334.1331 21⁄321.7081.4790.190.065.255.5
2 3⁄42.752.8272.7114 1⁄84.1253.9884.7634.5461 13⁄161.8691.6320.190.065.756
333.0812.9614 1⁄24.54.355.1964.95922.061.8150.190.066.256.5
3 1⁄43.253.3353.214 7⁄84.8754.7125.6295.3722 3⁄162.2511.9360.190.066.757
3 1⁄23.53.5893.4615 1⁄45.255.0756.0625.7862 5⁄162.382.0570.190.067.257.5
3 3⁄43.753.8583.7265 5⁄85.6255.4376.4956.1982 1⁄22.5722.2410.190.067.758
444.1113.975665.86.9286.6122 11⁄162.7642.4240.190.068.258.5

Different Types Of Hastelloy C276 Bolt

Different Types Of Bolts

Application of Hastelloy C276 Bolt

Testing of Hastelloy C276 Bolt

Packing of Hastelloy C276 Bolt

Destination Of Hastelloy C276 Bolt

ASME SB574 Hastelloy C276 Hex Head Bolt Manufacturer in Ahmedabad, Alloy C276 Eye Bolt Supplier in Hyderabad, Hastelloy C276 U Bolt Stockist in Pune, Hastelloy Alloy C276 Allen Bolt Manufacturer in Jamnagar, ASTM B574 Hastelloy C276 Stud Bolt Stockist in Coimbatore, Werkstoff Nr. 2.4819 Anchor Bolt Exporter in Bangalore, DIN 2.4819 Hex Bolt Exporter in Pimpri-Chinchwad
ASME SB574 Hastelloy C276 Allen Bolt Exporter in Argentina, ASME SB574 Hastelloy C276 Anchor Bolt Manufacturer in UAE, Hastelloy C276 Allen Bolt Stockist in Dubai, Hastelloy Alloy C276 Hex Bolt Manufacturer in Nigeria, Alloy C276 Eye Bolt Supplier in Malaysia, UNS N10276 Flange Head Bolt Supplier in Qatar, Werkstoff Nr. 2.4819 Allen Bolt Manufacturer in Singapore
Hastelloy C276 Stud Bolt Weight Chart, UNS N10276 Eye Bolt Weight Calculator, Werkstoff Nr. 2.4819 Stud Bolt Specification, Hastelloy Alloy C276 Allen Bolt Price Per Kg, ASME SB574 Hastelloy C276 Flange Head Bolt Price List, Alloy C276 U Bolt Grade Chart, DIN 2.4819 Anchor Bolt at Factory Price, Werkstoff Nr. 2.4819 Hex Bolt Price List in India, Hastelloy C276 Eye Bolt at Factory Price