1st Khetwadi Lane, Shop No. 8 Mumbai

Incoloy 825 Fasteners

Home » Incoloy 825 Fasteners
Get a Quote

Incoloy 825 Fasteners, UNS N08825 Hex Bolt, ASTM B425 Incoloy 825 Stud Bolt, ASME SB425 Heavy Hex Nut, DIN 2.4858 Allen Bolt, Grade 825 Plain Washer, UNS N08825 Spring Washer.

We provide Incoloy 825 fasteners, including ASTM b425 gr 825 bolts, Alloy 825 hex nuts, and Grade 825 Hex Bolts; we offer the most competitive pricing on Incoloy 825 Bolts.

The alloy known as ASTM B425 grade fasteners. N08825 has a specific chemical composition developed to offer outstanding resistance to various corrosive conditions. As a consequence, it finds employment in a wide variety of applications with a significant need for materials resistant to corrosion. These fasteners are utilized as components in various pickling machinery, including hot coils, tanks, baskets, and chains, among other applications. Although it is quite similar to alloy 800, ASTM b425 Incoloy 825 Stud Bolts is distinguished by its enhanced resistance to corrosion caused by aquatic environments.

About Incoloy 825 Fasteners

In addition to regular corrosion, UNS N08825 Threaded Rods exhibit exceptional resistance to oxidizing and reducing acids. This is in addition to their typical resistance to corrosion. These Incoloy 825 fasteners are also recognized for their resistance to local attack, including stress corrosion cracking, pitting, and pitting corrosion. Acids, such as sulfuric and phosphoric acids, do not pose a problem for Incoloy 825’s ability to resist corrosion.

In these conditions, these 825 Incoloy Heavy Hex Bolts tend to demonstrate good mechanical qualities at both room temperature and increased temperatures that go up to around 1000°F. Incoloy 825 has a high level of corrosion resistance to intergranular corrosion. Because of their exceptional corrosion resistance and relatively low cost, DIN 2.4858 Hex nuts are used in a wide variety of applications, including pressure vessels, where the temperature can reach as high as 800 degrees Fahrenheit. This is one of the reasons why they are so popular.

Specification Of Incoloy 825 Fasteners

SpecificationsASTM B564, ASME SB564 and DIN, ISO ,JIS ,GB, IS, BS, ASTM and all International Standards
SizeM3 - M100 | 3/6″ - 4″ | Custom Sizes
Fasteners Length3 mm - 200 mm | Custom Sizes
Nuts SizeM3 - M56 | 3/6" to 2" | Custom Sizes
Washers SizeM3 - M56 | 3/6" to 2" | Custom Sizes
DimensionsDIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3
Threads ConfigurationASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads and UNF, BSW, BSF, METRIC, UNC, or as required
FormHex, Threading, Square, Round as per Gauge Etc.
HeadHex, Square, Round, Hex flange, Flat, T-head & Triangular etc.
Neck typeHex, Square, Triangular, Oval & Knurled etc.
Manufacturing ProcessPassivation /plain, Wire Drawing, Cold Heading, Insert tapping, Heat Treatment, Surface Plating, Inspection, Packing.
Surface CoatingBlack Oxide, Cadmium, Galvanized, Teflon, Xylan, Zinc, Others Upon Request
PackingIN BULK: carton, pallet, Small Boxes or customer request
Test CertificateAs per EN 10204 / 3.1 Manufacturer Test Certificate, PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified
CertificationDual Certified As per ASTM & ASME Codes
Delivery timeRegular product : 7-15 days, Custom product : 2-4 weeks

Equivalent Grades Incoloy 825 Fasteners

STANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENOR
Incoloy 8252.4858N08825NCF 825NA 16ЭП703NFE30C20DUMNiCr21MoXH38BT

Chemical Composition Incoloy 825 Fasteners

GradeCMnSiSCuFeNiCrAlTi
8250.05 max1.00 max0.5 max0.03 max1.50 – 3.0022.00 min38.00 – 46.0019.50 – 23.500.02 max0.06 – 1.20

Mechanical Properties Incoloy 825 Fasteners

ElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation
8258.14 g/cm31400 °C (2550 °F)Psi – 80,000 , MPa – 550Psi – 32,000 , MPa – 22030 %

Dimensions Of Incoloy 825 Fasteners

High Nickel Alloys Bolts Dimensions Chart :

Nominal Size
or Basic
Product
Diameter

Full-Size Body
Diameter,
E
Width Across Flats,
F
Width Across
Corners, G
Head Height, H BasicRadius of
Fillet, R
Nominal Thread
Length for Bolt
Lengths,
LT
inchmmMaxMinBasic
inch
MaxMinMaxMinBasic
inch
MaxMinMaxMin6 in. and
Shoter
Over
6 in.
1⁄40.250.260.2377⁄160.4380.4250.5050.48411⁄640.1880.150.030.010.751
5⁄160.31250.3240.2981⁄20.50.4840.5770.5527⁄320.2350.1950.030.010.8751.125
3⁄80.3750.3880.369⁄160.5620.5440.650.621⁄40.2680.2260.030.0111.25
7⁄160.43750.4520.4215⁄80.6250.6030.7220.68719⁄640.3160.2720.030.011.1251.375
1⁄20.50.5150.4823⁄40.750.7250.8660.82611⁄320.3640.3020.030.011.251.5
5⁄80.6250.6420.60515⁄160.9380.9061.0831.03327⁄640.4440.3780.060.021.51.75
3⁄40.750.7680.72911⁄81.1251.0881.2991.241⁄20.5240.4550.060.021.752
7⁄80.8750.8950.8521 5⁄161.3121.2691.5161.44737⁄640.6040.5310.060.0222.25
111.0220.9761 1⁄21.51.451.7321.65343⁄640.70.5910.090.032.252.5
1 1⁄81.1251.1491.0981 11⁄161.6881.6311.9491.8593⁄40.780.6580.090.032.52.75
1 1⁄41.251.2771.2231 7⁄81.8751.8122.1652.06627⁄320.8760.7490.090.032.753
1 3⁄81.3751.4041.3452 1⁄162.0621.9942.3822.27329⁄320.940.810.090.0333.25
1 1⁄21.51.5311.472 1⁄42.252.1752.5982.4811.0360.9020.090.033.253.5
1 5⁄81.6251.6581.5912 7⁄162.4382.3562.8152.6161 3⁄321.1160.9780.090.033.53.75
1 3⁄41.751.7851.7162 5⁄82.6252.5383.0312.8931 5⁄321.1961.0540.120.043.754
1 7⁄81.8751.9121.8392 13⁄162.8122.7193.2483.0991 1⁄41.2761.130.120.0444.25
222.0391.964332.93.4643.3061 11⁄321.3881.1750.120.044.254.5
2 1⁄42.252.3052.2143 3⁄83.3753.2623.8973.7191 1⁄21.5481.3270.190.064.755
2 1⁄22.52.5592.4613 3⁄43.753.6254.334.1331 21⁄321.7081.4790.190.065.255.5
2 3⁄42.752.8272.7114 1⁄84.1253.9884.7634.5461 13⁄161.8691.6320.190.065.756
333.0812.9614 1⁄24.54.355.1964.95922.061.8150.190.066.256.5
3 1⁄43.253.3353.214 7⁄84.8754.7125.6295.3722 3⁄162.2511.9360.190.066.757
3 1⁄23.53.5893.4615 1⁄45.255.0756.0625.7862 5⁄162.382.0570.190.067.257.5
3 3⁄43.753.8583.7265 5⁄85.6255.4376.4956.1982 1⁄22.5722.2410.190.067.758
444.1113.975665.86.9286.6122 11⁄162.7642.4240.190.068.258.5

High Nickel Alloys Stud Bolts Dimensions Chart :

Nominal Size
Diameter, D
inch
Tap End Full
Thread Length,
BM
Umax = 2PMinimum Nut End
Full Thread Length,
Bmin
NominalMin.Max.UNC & NC-5
Thread
UNF Thread8UN ThreadL ≤ 1010
L > 16
1/40.3750.3500.4000.1000.071...0.7501.0001.500
5/160.4690.4400.4980.1110.083--0.8751.1251.625
3/80.5630.5320.5940.1250.083--1.0001.2501.750
7/160.6560.6200.6920.1430.100--1.1251.3751.875
1/20.7500.7080.7920.1540.100--1.2501.5002.000
9/160.8440.8020.8960.1670.111--1.3751.6252.125
5/80.9380.8920.9830.1820.111--1.5001.7502.250
3/41.1.251.0751.1750.2000.125--1.7502.0002.500
7/81.3131.2581.3680.2220.143--2.0002.2502.750
11.5001.4381.5620.2500.167--2.2502.5003.000
1 1/81.6881.6251.7500.2860.1670.2502.5002.7503.250
1 1/41.8751.8131.9380.2860.1670.2502.7503.0003.500
1 3/82.0632.0002.1250.3330.1670.2503.0003.2503.750
1 1/22.2502.1882.3130.3330.1670.2503.2503.5004.000
1 5/82.4382.3752.500----0.2503.5003.7504.250
1 3/42.6252.5632.6880.400--0.2503.7504.0004.500
1 7/82.8132.7502.875----0.2504.0004.2504.750
23.0002.9253.0750.444--0.2504.2504.5005.000
2 1/43.3753.3003.4500.444--0.2504.7505.0005.500
2 1/23.7503.6753.8250.500--0.2505.2505.5006.000
2 3/44.1254.0504.2000.500--0.2505.7506.0006.500
34.5004.4254.5750.500--0.250--6.5007.000
3 1/44.8754.7754.9750.500--0.250--7.0007.500
3 1/25.2505.1505.3500.500--0.250--7.5008.000
3 3/45.6255.5255.7250.500--0.250--8.0008.500
46.0005.9006.1000.500--0.250--8.5009.000

High Nickel Alloys Nuts Dimensions :

Nominal
Size

inch
Basic Major
Diameter of
Thread
Width Across Flats,
F
Width Across
Corners,
G
Thickness Heavy
Hex Nuts,
H
Thickness Heavy
Hex Jam Nuts,
H1
Maximum Runout of
Bearing Surface to
Thread
Axis, FIM
Heavy HEX NUTSHeavy Hex
Jam Nuts
Specified Proof load
Basic
inch
Min.MaxMin.MaxBasic
inch
Min.MaxBasic
inch
Min.MaxUp to
150,000 psi
150,000 psi
and Greater
All Strength
Levels
1/40.25001/20.4880.5000.5560.57715/640.2180.25011/640.1560.1880.0170.0110.017
5/160.31259/160.5460.5620.6220.65019/640.2800.31413/640.1860.2200.0200.0120.020
3/80.375011/160.6690.6880.7630.79423/640.3410.37715/640.2160.2520.0210.0140.021
7/160.43753/40.7280.7500.8300.86627/640.4030.44117/640.2470.2850.0220.0150.022
1/20.50007/80.8500.8750.9691.01031/640.4640.50419/640.2770.3170.0230.0160.023
9/160.562515/160.9090.9381.0371.08335/640.5260.56821/640.3070.3490.0240.0170.024
5/80.62501 1/161.0311.0621.1751.22739/640.5870.63123/640.3370.3810.0250.0180.025
3/40.75001 1/41.2121.2501.3821.44347/640.7100.75827/640.3980.4460.0270.0200.027
7/80.87501 7/161.3941.4381.5891.66055/640.8330.88531/640.4580.5100.0290.0220.029
11.00001 5/81.5751.6251.7961.87663/640.9561.01235/640.5190.5750.0310.0240.031
1 1/81.12501 13/161.7561.8122.0022.0931 7/641.0791.13939/640.5790.6390.0330.0270.033
1 1/41.250021.9382.0002.2092.3091 7/321.1871.25123/320.6870.7510.0350.0300.035
1 3/81.37502 3/162.1192.1882.4162.5261 11/321.3101.37825/320.7470.8150.0380.0330.038
1 1/21.50002 3/82.3002.3752.6222.7421 15/321.4331.50527/320.8080.8800.0410.0360.041
1 5/81.62502 9/162.4812.5622.8282.9591 19/321.5561.63229/320.8680.9440.0440.0380.044
1 3/41.75002 3/42.6622.7503.0353.1751 23/321.6791.75931/320.9291.0090.0480.0410.048
1 7/81.87502 15/162.8442.9383.2423.3921 27/321.8021.8861 1/320.9891.0730.0510.0440.051
22.00003 1/83.0253.1253.4493.6081 31/321.9252.0131 3/321.0501.1380.0550.0470.055
2 1/42.25003 1/23.3883.5003.8624.0412 13/642.1552.2511 13/641.1551.2510.0610.0520.061
2 1/22.50003 7/83.7503.8754.2754.4742 29/642.4012.5051 29/641.4011.5050.0680.0580.068
2 3/42.75004 1/44.1124.2504.6884.9072 45/642.6472.7591 37/641.5221.6340.0740.0640.074
33.00004 5/84.4754.6255.1025.3402 61/642.8933.0131 45/641.6431.7630.0810.0700.081
3 1/43.250054.8385.0005.5155.7743 3/163.1243.2521 13/161.7481.8760.0870.0750.087
3 1/23.50005 3/85.2005.3755.9286.2073 7/163.3703.5061 15/161.8702.0060.0940.0810.094
3 3/43.75005 3/45.5625.7506.3416.6403 11/163.6163.7602 1/161.9902.1340.1000.0870.100
44.00006 1/85.9256.1256.7557.0733 15/163.8624.0142 3/162.1122.2640.1070.0930.107

High Nickel Alloys Washer Dimensions Chart :

Nominal SizeTClipped Width E, Min.
I.D.O.D.StandardExtra Thick
[Note (1)]Max.Min.Max.Min.Max.Min.Max.Min.[Note (2)]
1214.4142725.74.63.110810.5
1618.4183432.44.63.110814
2022.5224240.44.63.110817.5
2224.5244442.44.63.410819.2
2426.5265048.44.63.410821
2730.53056S4.14.63.410823.6
3033.6336058.14.63.410826.2
3639.6397270.14.63.410831.S
4245.6458481.87.24.610836.7
4852.7529592.87.24.610842
5662.762107104.88.76.110849
6470.770118115.88.76.110856
7278.778130127.58.76.110863
8086.986142139.58.76.110870
9096.996159156.58.76.110878.7
100107.9107176173.58.76.110887.5

Different Types Of Incoloy 825 Fasteners

Different Types Of Bolts
Different Types Of Studs Bolts
Different Types Of Nuts
Different Types Of Washer
Different Types Of Screw

Application of Incoloy 825 Fasteners

Testing of Incoloy 825 Fasteners

Packing of Incoloy 825 Fasteners

Destination Of Incoloy 825 Fasteners

Incoloy 825 Stud Bolt Stockist in Pimpri-Chinchwad, Din 2.4858 Head Hex Nut Stockist in Bangalore, ASME SB425 Incoloy 825 Industrial Fasteners Exporter in Nashik, UNS N08825 Hot Forged Bolts Supplier in Vadodara, ASTM B425 Incoloy 825 high tensile Bolts Manufacturer in Bharuch, Din 2.4858 Hex nut Exporter in Hyderabad, Din 2.4858 Carriage Bolt Exporter in Dubai, Incoloy 825 Allen Bolt Exporter in Pune, Incoloy Alloy 825 Lag Bolt Manufacturer in Hyderabad, ASTM B425 Incoloy 825 Hex Bolt Manufacturer in Bengaluru, Incoloy 825 Square Bolt Stockist in Dammam, Incoloy Alloy 825 Steel Bolt Supplier in Coimbatore, ASME SB425 Incoloy 825 Spring washer Stockist in Ahmedabad, ASTM B425 Incoloy 825 Heavy Hex Bolt Supplier in Chennai, Incoloy Alloy 825 U Bolt Supplier in Abu Dhabi, UNS N08825 Plain Washer Manufacturer in Mumbai.
Incoloy 825 Allen Bolt Exporter in Qatar, UNS N08825 Plain Washer Manufacturer in Singapore, Incoloy 825 Square Bolt Stockist in Italy, ASTM B425 Incoloy 825 Heavy Hex Bolt Supplier in UAE, ASTM B425 Incoloy 825 high tensile Bolts Manufacturer in Australia, ASTM B425 Incoloy 825 Hex Bolt Manufacturer in USA, Incoloy Alloy 825 Steel Bolt Supplier in Saudi Arabia, ASME SB425 Incoloy 825 Spring washer Stockist in Malaysia, Din 2.4858 Carriage Bolt Exporter in Canada, UNS N08825 Hot Forged Bolts Supplier in Vietnam, ASME SB425 Incoloy 825 Industrial Fasteners Exporter in Oman, Incoloy 825 Stud Bolt Stockist in UK, Incoloy Alloy 825 Lag Bolt Manufacturer in Indonesia, Din 2.4858 Head Hex Nut Stockist in South Africa, Din 2.4858 Hex nut Exporter in Kuwait, Incoloy Alloy 825 U Bolt Supplier in UK.
Buy Incoloy 825 Stud bolts, Best Quality of 825 Grade Bolts, ASTM B425 Incoloy 825 Weight Chart, UNS N08825 Incoloy Fasteners Price List In India, Austenitic 825 Incoloy Nuts, Get UNS N08825 Head Hex Nut Chemical Composition, A wide range of Incoloy 825 Fasteners Size Chart, Incoloy Alloy 825 Grade Fastener Price Per Kg, Din 2.4858 Hex Bolt Weight Calculator, Incoloy 825 Heavy Hex Bolt Dimension PDF, Incoloy 825 Anchor Bolt Price List, ASME SB425 Incoloy 825 Square Bolt Catalogue, Get Quote Now of 825 Fasteners At Factory Price.