1st Khetwadi Lane, Shop No. 8 Mumbai

Monel K500 Bolt

Home » Monel K500 Bolt
Get a Quote

UNS N05500 Square Head Bolt, Alloy K500 Anchor Bolt, Werkstoff Nr. 2.4375 Allen Bolt, Monel Alloy K500 Eye Bolt, ASME SB127 Stud Bolt, DIN 2.4375 Hex Bolt, Monel K500 Hex Head Bolt, ASTM B127 Monel K500 U Bolt

Shreeashapurasteel is one of the prominent manufacturer and exporter of Monel K500 Bolts. Along with the nickel and copper content, the Monel K500 Bolts also contain carbon, 2.3% aluminium, manganese, silicon, iron, sulphur, and titanium. The material’s exceptional strength, extreme corrosion resistance, and flexibility are all due to its special composition. The threaded rods known as Alloy K500 Studs have threads on both ends. Depending on the thread type and the threaded distance from the centre, they can be of several varieties. The material is resistant to both high pressure and high temperatures. It has a melting point of 1350 degrees Celsius, a minimum yield strength of 790 MPa, and a minimum tensile strength of 1100 MPa. These numbers are twice as strong as 304 grade.

About Monel K500 Bolt

Therefore, using UNS N05500 Bolts in high temperature applications is simple. The bolts adhere to the ASTM B865-04 specification as well as DIN, ASTM, and BS standards. The sizes range from M3 through M56 and from 3/6 inches to 2 inches, as well as any bespoke sizes that may be needed. The lengths range from 3mm to 200mm. There are numerous sorts, including square bolts, U bolts, eye bolts, T bolts, and K500 Monel Hex Head Bolt. These bolts are each utilised in various applications. One unique variety of the Monel K500 Bolts is the ASME SB 865-04 Monel Shoulder Nuts, which have a shoulder added to the nut to enable maximum threading and hold the bolts firmly in place.

Specification Of Monel K500 Bolt

SpecificationsASTM B564, ASME SB564 and DIN, ISO ,JIS ,GB, IS, BS, ASTM and all International Standards
SizeM3 - M100 | 3/6″ - 4″ | Custom Sizes
Length3 mm - 200 mm | Custom Sizes
DimensionsDIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3
Threads ConfigurationASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads and UNF, BSW, BSF, METRIC, UNC, or as required
FormHex, Threading, Square, Round as per Gauge Etc.
HeadHex, Square, Round, Hex flange, Flat, T-head & Triangular etc.
Neck typeHex, Square, Triangular, Oval & Knurled etc.
Manufacturing ProcessPassivation /plain, Wire Drawing, Cold Heading, Insert tapping, Heat Treatment, Surface Plating, Inspection, Packing.
Surface CoatingBlack Oxide, Cadmium, Galvanized, Teflon, Xylan, Zinc, Others Upon Request
PackingIN BULK: carton, pallet, Small Boxes or customer request
Test CertificateAs per EN 10204 / 3.1 Manufacturer Test Certificate, PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified
CertificationDual Certified As per ASTM & ASME Codes
Delivery timeRegular product : 7-15 days, Custom product : 2-4 weeks

Equivalent Grades Monel K500 Bolt

Monel K5002.4375N05500-----

Chemical Composition Monel K500 Bolt

Monel K5000.25 max1.5 max0.5 max0.010 max27.00 – 33.000.5 – 263.00 min

Mechanical Properties Monel K500 Bolt

ElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation
Monel K5008.44 g/cm31350 °C (2460 °F)Psi – 160000 , MPa – 1100Psi – 115000 , MPa – 79020 %

Dimensions Of Monel K500 Bolt

High Nickel Alloys Bolts Dimensions Chart :

Nominal Size
or Basic

Full-Size Body
Width Across Flats,
Width Across
Corners, G
Head Height, H BasicRadius of
Fillet, R
Nominal Thread
Length for Bolt
MaxMinMaxMin6 in. and
6 in.
7⁄80.8750.8950.8521 5⁄161.3121.2691.5161.44737⁄640.6040.5310.060.0222.25
111.0220.9761 1⁄21.51.451.7321.65343⁄640.70.5910.
1 1⁄81.1251.1491.0981 11⁄161.6881.6311.9491.8593⁄40.780.6580.
1 1⁄41.251.2771.2231 7⁄81.8751.8122.1652.06627⁄320.8760.7490.090.032.753
1 3⁄81.3751.4041.3452 1⁄162.0621.9942.3822.27329⁄320.940.810.090.0333.25
1 1⁄21.51.5311.472 1⁄42.252.1752.5982.4811.0360.9020.
1 5⁄81.6251.6581.5912 7⁄162.4382.3562.8152.6161 3⁄321.1160.9780.
1 3⁄41.751.7851.7162 5⁄82.6252.5383.0312.8931 5⁄321.1961.0540.120.043.754
1 7⁄81.8751.9121.8392 13⁄162.8122.7193.2483.0991 1⁄41.2761.130.120.0444.25
222.0391.964332.93.4643.3061 11⁄321.3881.1750.
2 1⁄42.252.3052.2143 3⁄83.3753.2623.8973.7191 1⁄21.5481.3270.190.064.755
2 1⁄22.52.5592.4613 3⁄43.753.6254.334.1331 21⁄321.7081.4790.
2 3⁄42.752.8272.7114 1⁄84.1253.9884.7634.5461 13⁄161.8691.6320.190.065.756
333.0812.9614 1⁄24.54.355.1964.95922.061.8150.
3 1⁄43.253.3353.214 7⁄84.8754.7125.6295.3722 3⁄162.2511.9360.190.066.757
3 1⁄23.53.5893.4615 1⁄45.255.0756.0625.7862 5⁄162.382.0570.
3 3⁄43.753.8583.7265 5⁄85.6255.4376.4956.1982 1⁄22.5722.2410.190.067.758
444.1113.975665.86.9286.6122 11⁄162.7642.4240.

Different Types Of Monel K500 Bolt

Different Types Of Bolts

Application of Monel K500 Bolt

Testing of Monel K500 Bolt

Packing of Monel K500 Bolt

Destination Of Monel K500 Bolt

Alloy K500 Eye Bolt Supplier in Hyderabad, WNRF 2.4375 Allen Bolt Manufacturer in Jamnagar, UNS N05500 Flange Head Bolt Supplier in Chennai, Monel Alloy K500 Hex Bolt Exporter in Pimpri-Chinchwad, DIN 2.4375 Stud Bolt Stockist in Coimbatoren, ASTM B127 U Bolt Stockist in Pune, Monel K500 Hex Head Bolt Manufacturer in Ahmedabad
Monel K500 Allen Bolt Exporter in Argentina, ASTM B127 Allen Bolt Stockist in Dubai, DIN 2.4375 U Bolt Stockist in South Africa, ASTM B127 U Bolt Stockist in Indonesia, Werkstoff Nr. 2.4375 Hex Bolt Manufacturer in Nigeria, Alloy K500 Stud Bolt Supplier in Brazil, Monel K500 Anchor Bolt Manufacturer in UAE, ASME SB127 Stud Bolt Exporter in Saudi Arabia, Alloy K500 Eye Bolt Supplier in Malaysia
Monel Alloy K500 Anchor Bolt at Factory Price, Alloy K500 U Bolt Grade Chart, UNS N05500 Eye Bolt Weight Calculator, ASTM B127 Stud Bolt Weight Chart, DIN 2.4375 Hex Head Bolt Catalogue, Werkstoff Nr. 2.4375 Allen Bolt Price Per Kg, ASTM B127 Eye Bolt at Factory Price, Monel K500 Flange Head Bolt Price List, UNS N05500 Stud Bolt Specification, ASME SB127 Hex Bolt Price List in India