1st Khetwadi Lane, Shop No. 8 Mumbai

Stainless Steel 310 Stud Bolt

Home » Stainless Steel 310 Stud Bolt
Get a Quote

UNS S31000 Bonding Stud Bolt, SS 310 Tap End Threaded Rod, ASME SA193 Stainless Steel 310 Tap End Stud Bolt, DIN 1.4841 Full Threaded Stud Bolt, Stainless Steel 310 Flange Stud Bolt, ASTM A193 Stainless Steel 310 Half Threaded Rod.

What are Stainless Steel 310 Stud bolts?

The temperature, holding duration, and environmental conditions at which micrograph change are all significantly influenced by stainless steel 310 stud bolt nuts. The stainless steel 310 stud bolts change the turning points between ferrite and austenite, affect the rates of solution and diffusion, and compete with other components to generate intermetallic compounds like carbides and nitrides. The impacts of all these UNS S31000 Threaded Rods on heat-treatment conditions, microstructures, and characteristics are the subject of a wealth of empirical data.

Properties of Stainless Steel 310 Stud Bolts:

  • Protection against Corrosion

Compared to other metals, Grade 310 Threaded Stud bolts resist corrosion better. As sufficient chromium is present, the metal will be shielded by a chromium oxide coating, preventing pollution and tarnishing.  

  • Strength

Due to their high strength, UNS S31000 PTFE Coated Stud bolts can withstand severe, corrosive conditions and locations with high temperatures.

  • Value

The higher expense of ASTM A193 SS 310 Half Threaded Stud bolt is unquestionably worthwhile. This material’s fasteners have a longer lifespan, which ultimately saves you money

  • Easily Maintained  

Because it is resistant to corrosion and scratches, DIN 1.4841 Tap End Stud bolts simplify the service. Also, cleaning it is simple.

  • Surface Coatings

Surface coatings of 310 Stainless Steel Polished Stud Bolts includes Epoxy Coating, Mirror Buffed, Teflon Coating, Electro Polished, Zinc Plating, and Oxidized coating.

About Stainless Steel 310 Stud Bolt

Characteristics of Stainless Steel 310 Stud Bolts:

  • The Material Specification of 310 Grade Stud Bolts are ASTM A194, UNS S31000 and ASME SA193 Bolts.
  • The length of these bolts varies from 3 mm to 200 mm.
  • The Production process of these bolts areM2-M24, which includes cold forging and hot forging.

Applications of Stainless Steel 310 Stud Bolts:

  • In high temperature applications like furnace components and heat machinery, 310 ss Double End stud bolts are employed.
  • Stainless steel of the 310 grades can withstand continuous service temperatures of 1150°C and intermittent service temperatures of 1035°C.
  • Because it is a tougher substance than the metal being secured in these sorts of applications, it is frequently used to manufacture self-tapping (or self-drilling) screws, siding screws, roofing screws, and self-drilling screws.
  • They are also utilized in parts that come into contact with chemicals, seawater, or other corrosive substances. high wear components. sanitary appliances.
  • Components that are subjected to a lot of heat and stress are used in additional applications.
  • Heat treatment equipment can employ 310-grade stainless steel stud bolts because they can resist temperatures of up to 1500 degrees Celsius in continuous service and 1033 degrees Celsius in intermittent usage.
  • The UNS S31000 M24 Stud bolts are frequently used in the petrochemical sectors because of their distinctive qualities.

Specification Of Stainless Steel 310 Stud Bolt

SpecificationsASTM A 193 / ASME SA 193 and DIN, ISO ,JIS ,GB, IS, BS, ASTM and all International Standards
SizeM3 - M100 | 3/6″ - 4″ | Custom Sizes
Sud Bolt Length3 mm - 200 mm | Custom Sizes
DimensionsDIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3
Threads ConfigurationUNF, BSW, BSF, METRIC, UNC, or as required and ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads
FormHex, Threading, Square, Round as per Gauge Etc.
HeadHex, Square, Round, Hex flange, Flat, T-head & Triangular etc.
Neck typeHex, Square, Triangular, Oval & Knurled etc.
Manufacturing ProcessPassivation /plain, Wire Drawing, Cold Heading, Insert tapping, Heat Treatment, Surface Plating, Inspection, Packing.
Surface CoatingBlack Oxide, Cadmium, Galvanized, Teflon, Xylan, Zinc, Others Upon Request
PackingIN BULK: carton, pallet, Small Boxes or customer request
Test CertificateAs per EN 10204 / 3.1 Manufacturer Test Certificate, PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified
CertificationDual Certified As per ASTM & ASME Codes
Delivery timeRegular product : 7-15 days, Custom product : 2-4 weeks

Equivalent Grades Stainless Steel 310 Stud Bolt

STANDARDWERKSTOFF NR.UNSJISBSGOSTAFNOREN
SS 3101.4841S31000SUS 310310S2420Ch25N20S2X15CrNi25-20

Chemical Composition Stainless Steel 310 Stud Bolt

GradeCMnSiPSCrMoNiFe
SS 3100.025 max2.0 max0.15 max0.020 max0.015 max24.00 – 26.000.10 max19.00 – 21.0054.7 min

Mechanical Properties Stainless Steel 310 Stud Bolt

GradeTensile Strength (MPa) minYield Strength 0.2% Proof (MPa) minElongation (alo 50mm) minHardness
Rockwell B (HR B) maxBrinell (HB) max
31051520540952.17

Dimensions Of Stainless Steel 310 Stud Bolt

Stainless Steel Stud Bolts Dimensions Chart :

Nominal Size
Diameter, D
inch
Tap End Full
Thread Length,
BM
Umax = 2PMinimum Nut End
Full Thread Length,
Bmin
NominalMin.Max.UNC & NC-5
Thread
UNF Thread8UN ThreadL ≤ 1010
L > 16
1/40.3750.3500.4000.1000.071...0.7501.0001.500
5/160.4690.4400.4980.1110.083--0.8751.1251.625
3/80.5630.5320.5940.1250.083--1.0001.2501.750
7/160.6560.6200.6920.1430.100--1.1251.3751.875
1/20.7500.7080.7920.1540.100--1.2501.5002.000
9/160.8440.8020.8960.1670.111--1.3751.6252.125
5/80.9380.8920.9830.1820.111--1.5001.7502.250
3/41.1.251.0751.1750.2000.125--1.7502.0002.500
7/81.3131.2581.3680.2220.143--2.0002.2502.750
11.5001.4381.5620.2500.167--2.2502.5003.000
1 1/81.6881.6251.7500.2860.1670.2502.5002.7503.250
1 1/41.8751.8131.9380.2860.1670.2502.7503.0003.500
1 3/82.0632.0002.1250.3330.1670.2503.0003.2503.750
1 1/22.2502.1882.3130.3330.1670.2503.2503.5004.000
1 5/82.4382.3752.500----0.2503.5003.7504.250
1 3/42.6252.5632.6880.400--0.2503.7504.0004.500
1 7/82.8132.7502.875----0.2504.0004.2504.750
23.0002.9253.0750.444--0.2504.2504.5005.000
2 1/43.3753.3003.4500.444--0.2504.7505.0005.500
2 1/23.7503.6753.8250.500--0.2505.2505.5006.000
2 3/44.1254.0504.2000.500--0.2505.7506.0006.500
34.5004.4254.5750.500--0.250--6.5007.000
3 1/44.8754.7754.9750.500--0.250--7.0007.500
3 1/25.2505.1505.3500.500--0.250--7.5008.000
3 3/45.6255.5255.7250.500--0.250--8.0008.500
46.0005.9006.1000.500--0.250--8.5009.000

Different Types Of Stainless Steel 310 Stud Bolt

Different Types Of Studs Bolts

Application of Stainless Steel 310 Stud Bolt

Testing of Stainless Steel 310 Stud Bolt

Packing of Stainless Steel 310 Stud Bolt

Destination Of Stainless Steel 310 Stud Bolt

UNS S31000 Double End Stud Bolt Supplier in Coimbatore, 310 Stainless Steel Double End Threaded Rod Supplier in Chennai, UNS S31000 Bonding Stud Bolt Manufacturer in Hyderabad, UNS S31000 Tap End Threaded Rod Exporter in Nashik, ASME SA193 Stainless Steel 310 Tap End Stud Bolt Exporter in Hyderabad, Stainless Steel 310 Full Threaded Rod Manufacturer in Bengaluru, ASTM A193 Stainless Steel 310 Full Threaded Stud Bolt Supplier in Vadodara, SS 310 Tap End Threaded Rod Stockist in Ahmedabad, ASTM A193 Stainless Steel 310 Half Threaded Rod Stockist in Pimpri-Chinchwad, DIN 1.4841 Half Threaded Stud Bolt Exporter in Pune, ASME SA193 Stainless Steel 310 Double End Threaded Rod Manufacturer in Bharuch, DIN 1.4841 Full Threaded Stud Bolt Manufacturer in Mumbai, Stainless Steel 310 Flange Stud Bolt Stockist in Bangalore.

SS 310 Tap End Threaded Rod Stockist in Malaysia, ASME SA193 Stainless Steel 310 Double End Threaded Rod Manufacturer in Australia, UNS S31000 Tap End Threaded Rod Exporter in Oman, ASME SA193 Stainless Steel 310 Tap End Stud Bolt Exporter in Kuwait, SS 310 Bonding Stud Bolt Supplier in UK, DIN 1.4841 Half Threaded Stud Bolt Exporter in Qatar, ASTM A193 Stainless Steel 310 Half Threaded Rod Stockist in UK, Stainless Steel 310 Full Threaded Rod Manufacturer in USA, 310 Stainless Steel Flange Stud Bolt Exporter in Canada, DIN 1.4841 Full Threaded Stud Bolt Manufacturer in Singapore, UNS S31000 Bonding Stud Bolt Manufacturer in Indonesia, UNS S31000 Double End Stud Bolt Supplier in Saudi Arabia, DIN 1.4841 Half Threaded Stud Bolt Stockist in Italy, ASTM A193 Stainless Steel 310 Full Threaded Stud Bolt Supplier in Vietnam, Stainless Steel 310 Flange Stud Bolt Stockist in South Africa, 310 Stainless Steel Double End Threaded Rod Supplier in UAE.

ASME SA193 Stainless Steel 310 Double End Threaded Rod Weight Calculator, UNS S31000 Bonding Stud Bolt At Factory Price, 310 Stainless Steel Double End Threaded Rod At Factory Price, DIN 1.4841 Full Threaded Stud Bolt Price List In India, ASTM A193 Stainless Steel 310 Full Threaded Stud Bolt Price List, Stainless Steel 310 Flange Stud Bolt Weight Chart, SS 310 Tap End Threaded Rod Catalogue, DIN 1.4841 Half Threaded Stud Bolt At Factory Price, UNS S31000 Tap End Threaded Rod Price Per Kg, ASTM A193 Stainless Steel 310 Half Threaded Rod Price List, Stainless Steel 310 Full Threaded Rod Weight Chart, UNS S31000 Double End Stud Bolt Price Per Kg, ASME SA193 Stainless Steel 310 Tap End Stud Bolt Weight Calculator.