1st Khetwadi Lane, Shop No. 8 Mumbai

Stainless Steel 347 Stud Bolt

Home » Stainless Steel 347 Stud Bolt
Get a Quote

DIN 1.455 Full Threaded Stud Bolt, UNS S34700 Double End Stud Bolt, SS 347 Tap End Threaded Rod, ASTM A193 Stainless Steel 347 Half Threaded Rod, ASME SA193 Stainless Steel 347 Tap End Stud Bolt, DIN 1.455 Half Threaded Stud Bolt.

What do Stainless Steel 347 Stud Bolts mean?

Columbium stabilized stainless steel austenitic alloy grade with superior corrosion resistance is designated as Stainless-Steel Grade 347/347H. This grade exhibits exceptional resistance to carbide precipitation-induced intergranular corrosion. Additionally, stainless steel 347 stud bolts may be tailored to meet individual needs in terms of diameters and thicknesses. The alloy is taken into consideration for applications requiring intermittent heating between temperatures of 427°C and 899°C or welding under circumstances preventing post-weld annealing.

Properties of Stainless Steel 347 Stud Bolts:

Numerous other qualities of UNS S34700 Full Threaded Rods include exceptional resistance to considerable corrosion and lower acids. It also effectively resists degradation and titanium carbide precipitation in the temperature range. These Stud bolts are appropriate for severe load circumstances and highly challenging working conditions because of their high tensile strength and creep resistance. Due to its relative ductility and toughness, DIN 1.4550 Half threaded stud bolts may be freely stamped, drawn, blanked, and spun.

About Stainless Steel 347 Stud Bolt

Characteristics of 347 Stud Bolts:

  • Because ASTM A193 SS 347 Stud Bolts were designed to withstand high temperatures, their resistance to water corrosion was constrained.
  • Good strength yield strength, short- and long-term creep resistance, resistance to rust from oxygen and organic compounds, etc., are all characteristics of Stainless Steel 347 Stud Bolts.
  • The material Grade 347 Tap End Stud Bolts, however, are vulnerable to dynamic recrystallization in the heat-corresponding layer of welds because of their high carbon content.  
  • High ash content Composition 347 Grade PTFE Stud Bolts may be welded using any fusion or resistance welding technique, making them one of the highest-alloy steels regarded as the best weldable.

Applications of Stainless Steel 347 Stud Bolts:

  • SS 347 Zinc Plated stud bolts have the most common applications in aircraft collection rings, heat transfer tubes, strong wall welded machines, cabin heaters, and exhaust stacks.   
  • Industrialists found stainless steel 347 tie stud bolts among all the alloy steels to be the most weldable. They may be joined using both resistance welding and fusion techniques. Better intergranular corrosion resistance and concentrated inclinations to form an unbroken network of carbon steels at the grain boundaries are two characteristics of stainless steel 347H tie bars.
  • In the chemical, and gas industries, 347 stainless steel stud bolts are frequently used in heating systems, compressors, heat exchangers, pipelines, and condensers.

Specification Of Stainless Steel 347 Stud Bolt

SpecificationsASTM A 193 / ASME SA 193 and DIN, ISO ,JIS ,GB, IS, BS, ASTM and all International Standards
SizeM3 - M100 | 3/6″ - 4″ | Custom Sizes
Sud Bolt Length3 mm - 200 mm | Custom Sizes
DimensionsDIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3
Threads ConfigurationUNF, BSW, BSF, METRIC, UNC, or as required and ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads
FormHex, Threading, Square, Round as per Gauge Etc.
HeadHex, Square, Round, Hex flange, Flat, T-head & Triangular etc.
Neck typeHex, Square, Triangular, Oval & Knurled etc.
Manufacturing ProcessPassivation /plain, Wire Drawing, Cold Heading, Insert tapping, Heat Treatment, Surface Plating, Inspection, Packing.
Surface CoatingBlack Oxide, Cadmium, Galvanized, Teflon, Xylan, Zinc, Others Upon Request
PackingIN BULK: carton, pallet, Small Boxes or customer request
Test CertificateAs per EN 10204 / 3.1 Manufacturer Test Certificate, PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified
CertificationDual Certified As per ASTM & ASME Codes
Delivery timeRegular product : 7-15 days, Custom product : 2-4 weeks

Equivalent Grades Stainless Steel 347 Stud Bolt

STANDARDWERKSTOFF NR.UNSJISGOSTEN
SS 3471.4550S34700SUS 34708Ch18N12BX6CrNiNb18-10

Chemical Composition Stainless Steel 347 Stud Bolt

GradeCMnSiPSCrCbNiFe
SS 3470.08 max2.0 max1.0 max0.045 max0.030 max17.00 - 20.0010xC – 1.109.00 - 13.0062.74 min

Mechanical Properties Stainless Steel 347 Stud Bolt

DensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation
8.0 g/cm31454 °C (2650 °F)Psi – 75000 , MPa – 515Psi – 30000 , MPa – 20535 %

Dimensions Of Stainless Steel 347 Stud Bolt

Stainless Steel Stud Bolts Dimensions Chart :

Nominal Size
Diameter, D
inch
Tap End Full
Thread Length,
BM
Umax = 2PMinimum Nut End
Full Thread Length,
Bmin
NominalMin.Max.UNC & NC-5
Thread
UNF Thread8UN ThreadL ≤ 1010
L > 16
1/40.3750.3500.4000.1000.071...0.7501.0001.500
5/160.4690.4400.4980.1110.083--0.8751.1251.625
3/80.5630.5320.5940.1250.083--1.0001.2501.750
7/160.6560.6200.6920.1430.100--1.1251.3751.875
1/20.7500.7080.7920.1540.100--1.2501.5002.000
9/160.8440.8020.8960.1670.111--1.3751.6252.125
5/80.9380.8920.9830.1820.111--1.5001.7502.250
3/41.1.251.0751.1750.2000.125--1.7502.0002.500
7/81.3131.2581.3680.2220.143--2.0002.2502.750
11.5001.4381.5620.2500.167--2.2502.5003.000
1 1/81.6881.6251.7500.2860.1670.2502.5002.7503.250
1 1/41.8751.8131.9380.2860.1670.2502.7503.0003.500
1 3/82.0632.0002.1250.3330.1670.2503.0003.2503.750
1 1/22.2502.1882.3130.3330.1670.2503.2503.5004.000
1 5/82.4382.3752.500----0.2503.5003.7504.250
1 3/42.6252.5632.6880.400--0.2503.7504.0004.500
1 7/82.8132.7502.875----0.2504.0004.2504.750
23.0002.9253.0750.444--0.2504.2504.5005.000
2 1/43.3753.3003.4500.444--0.2504.7505.0005.500
2 1/23.7503.6753.8250.500--0.2505.2505.5006.000
2 3/44.1254.0504.2000.500--0.2505.7506.0006.500
34.5004.4254.5750.500--0.250--6.5007.000
3 1/44.8754.7754.9750.500--0.250--7.0007.500
3 1/25.2505.1505.3500.500--0.250--7.5008.000
3 3/45.6255.5255.7250.500--0.250--8.0008.500
46.0005.9006.1000.500--0.250--8.5009.000

Different Types Of Stainless Steel 347 Stud Bolt

Different Types Of Studs Bolts

Application of Stainless Steel 347 Stud Bolt

Testing of Stainless Steel 347 Stud Bolt

Packing of Stainless Steel 347 Stud Bolt

Destination Of Stainless Steel 347 Stud Bolt

DIN 1.455 Half Threaded Stud Bolt Exporter in Pune, ASTM A193 Stainless Steel 347 Double End Threaded Rod Manufacturer in Bharuch, UNS S34700 Double End Stud Bolt Supplier in Coimbatore, DIN 1.455 Full Threaded Stud Bolt Manufacturer in Mumbai, ASME SA193 Stainless Steel 347 Tap End Stud Bolt Exporter in Hyderabad, SS 347 Tap End Threaded Rod Stockist in Ahmedabad, Stainless Steel 347 Flange Stud Bolt Stockist in Bangalore, UNS S34700 Tap End Threaded Rod Exporter in Nashik, UNS S34700 Bonding Stud Bolt Manufacturer in Hyderabad, Stainless Steel 347 Full Threaded Rod Manufacturer in Bengaluru, ASTM A193 Stainless Steel 347 Full Threaded Stud Bolt Supplier in Vadodara, 321 Stainless Steel Double End Threaded Rod Supplier in Chennai, DIN 1.455 Half Threaded Stud Bolt Stockist in Daman, ASTM A193 Stainless Steel 347 Half Threaded Rod Stockist in Pimpri-Chinchwad.
DIN 1.455 Half Threaded Stud Bolt Stockist in Italy, SS 347 Tap End Threaded Rod Stockist in Malaysia, DIN 1.455 Half Threaded Stud Bolt Exporter in Qatar, UNS S34700 Bonding Stud Bolt Manufacturer in Indonesia, Stainless Steel 347 Flange Stud Bolt Stockist in South Africa, SS 347 Bonding Stud Bolt Supplier in UK, 347 Stainless Steel Flange Stud Bolt Exporter in Canada, 321 Stainless Steel Double End Threaded Rod Supplier in UAE, UNS S34700 Double End Stud Bolt Supplier in Saudi Arabia, ASTM A193 Stainless Steel 347 Full Threaded Stud Bolt Supplier in Vietnam, ASTM A193 Stainless Steel 347 Double End Threaded Rod Manufacturer in Australia, Stainless Steel 347 Full Threaded Rod Manufacturer in USA, UNS S34700 Tap End Threaded Rod Exporter in Oman, ASME SA193 Stainless Steel 347 Tap End Stud Bolt Exporter in Kuwait, DIN 1.455 Full Threaded Stud Bolt Manufacturer in Singapore, ASTM A193 Stainless Steel 347 Half Threaded Rod Stockist in UK.
UNS S34700 Bonding Stud Bolt At Factory Price, Stainless Steel 347 Full Threaded Rod Weight Chart, ASTM A193 Stainless Steel 347 Half Threaded Rod Price List, SS 347 Bonding Stud Bolt Catalogue, ASME SA193 Stainless Steel 347 Tap End Stud Bolt Weight Calculator, Stainless Steel 347 Flange Stud Bolt Weight Chart, 321 Stainless Steel Double End Threaded Rod At Factory Price, DIN 1.455 Full Threaded Stud Bolt Price List In India, DIN 1.455 Half Threaded Stud Bolt At Factory Price, UNS S34700 Tap End Threaded Rod Price Per Kg, SS 347 Tap End Threaded Rod Catalogue, ASTM A193 Stainless Steel 347 Full Threaded Stud Bolt Price List, ASTM A193 Stainless Steel 347 Double End Threaded Rod Weight Calculator, UNS S34700 Double End Stud Bolt Price Per Kg, DIN 1.455 Half Threaded Stud Bolt Price List In India.