1st Khetwadi Lane, Shop No. 8 Mumbai

Teflon Coated Fasteners

Home » Teflon Coated Fasteners
Get a Quote

Teflon Coated Threaded Rod, Teflon Xylan Coated Fasteners, Teflon Coated Stud Bolts, Teflon Coated Bolts Suppliers, Teflon Coated Fasteners, Teflon Coated Bolts And Nuts, Teflon Coated Machine Screw In Mumbai, India.

Although fasteners are responsible for keeping more than one component attached, corrosion and failure can be caused by exposure to any corrosive. This is a difficulty, particularly in applications that carry out operations that involve combustible materials or even hazardous substances. As a result, the utilization of coated fasteners is an appropriate alternative. Not only is the exterior of these coated nuts made using a substrate, but the producers of coated nuts also encourage utilizing the substrate since it extends the product’s lifespan.

Additionally, the coating on any Teflon-Coated B7 Stud Bolt does not respond negatively to the application, which increases the bolt’s longevity and provides a cost-effective and practical solution. The fluoropolymer coating known as PTFE is extremely long-lasting due to its synthetic nature. Ptfe-coated stud bolts benefit from having a thin coat to make them more temperature resistant. Excellent abrasion resistance and resistance to a wide variety of chemical compounds are two additional advantages that come with using PTFE-coated fasteners. PTFE-coated bolts and nuts not only provide superior qualities for resisting corrosion, but they also display very low friction coefficients.

Teflon Coated Fasteners

About Teflon Coated Fasteners

Since the use of cadmium for coating is restricted, probably because it is recognized as a carcinogen, cadmium-coated fasteners are known to resist mold or prevent bacterial development by serving as a protective barrier on the fasteners. This is because the cadmium coating acts as a barrier between the surface of the fasteners and the mold or bacteria. On the other hand, using fasteners with a polymer coating is an excellent choice for applications requiring fasteners that can withstand significant wear and tear. Because of how the polymer adheres to the fastener, the coating layer put to the fastener is irremovable, and the coating itself is permanent. Therefore, it will be impossible for any fastener to sustain scratches or other blemishes.

Specification of Teflon Coated Fasteners

SpecificationsIS, ANSI, ASTM DIN, ISO, JIS, GB, ASME, BS, UNI and all International Standards
ThreadsBSF, UNF METRIC, UNC, BSW or as required
StandardM02 to M33ANSI – American National Standards Institute
SS Stud Bolt length are defined in ASME B16.5 standard

ANSI B 28.2.4 1M

ANSI B 18.2.4 2M

ASME B18.5

SS Hex nuts are defined in ASME B18.2.2

DIN: DIN 933, DIN 931, DIN 970, DIN 934

UTS – Unified Thread Standard : UNF, NPT, NPTF, UNS, UNC, UNEF

ISO – International Organization for Standardization ISO 4033, : ISO 4032, JIS standards
Fasteners/ Bolts SizeM10, M4, M16, M36 M2.5, M6, M30, M12, M8, M14, M2, M3, M20, M24, M5 to M160
Length3 mm to 200 mm
Head drivePhillips, Slotted, Phillips/Slot, Six-Lobe etc
Test Certificateas per EN 10204 / 3.1 Manufacturer Test Certificate
FinishingZinc white, (yellow, black, blue), black oxide,
Dacroment, Geometry, plated zinc-nickel, anodizing, nickel plated, Stainless steel: Passivated
Self-Colour, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Sherardized, Stainless Steel, some special one like DACROMET and Mechanically Applied coating
raw materials of SourceJSPL, Usha Martin, Tata Steel, Mukund Steel, RINL, Dhamm Steel etc.
Surface Coating

Teflon Coated Fasteners


PackingIN BULK: pallet, canton, carton / Small Boxs / pallet or customer request

Dimensions Of Teflon Coated Fasteners

Teflon Coated Bolts Dimensions Chart :

Nominal Size
or Basic
Product
Diameter

Full-Size Body
Diameter,
E
Width Across Flats,
F
Width Across
Corners, G
Head Height, H BasicRadius of
Fillet, R
Nominal Thread
Length for Bolt
Lengths,
LT
inchmmMaxMinBasic
inch
MaxMinMaxMinBasic
inch
MaxMinMaxMin6 in. and
Shoter
Over
6 in.
1⁄40.250.260.2377⁄160.4380.4250.5050.48411⁄640.1880.150.030.010.751
5⁄160.31250.3240.2981⁄20.50.4840.5770.5527⁄320.2350.1950.030.010.8751.125
3⁄80.3750.3880.369⁄160.5620.5440.650.621⁄40.2680.2260.030.0111.25
7⁄160.43750.4520.4215⁄80.6250.6030.7220.68719⁄640.3160.2720.030.011.1251.375
1⁄20.50.5150.4823⁄40.750.7250.8660.82611⁄320.3640.3020.030.011.251.5
5⁄80.6250.6420.60515⁄160.9380.9061.0831.03327⁄640.4440.3780.060.021.51.75
3⁄40.750.7680.72911⁄81.1251.0881.2991.241⁄20.5240.4550.060.021.752
7⁄80.8750.8950.8521 5⁄161.3121.2691.5161.44737⁄640.6040.5310.060.0222.25
111.0220.9761 1⁄21.51.451.7321.65343⁄640.70.5910.090.032.252.5
1 1⁄81.1251.1491.0981 11⁄161.6881.6311.9491.8593⁄40.780.6580.090.032.52.75
1 1⁄41.251.2771.2231 7⁄81.8751.8122.1652.06627⁄320.8760.7490.090.032.753
1 3⁄81.3751.4041.3452 1⁄162.0621.9942.3822.27329⁄320.940.810.090.0333.25
1 1⁄21.51.5311.472 1⁄42.252.1752.5982.4811.0360.9020.090.033.253.5
1 5⁄81.6251.6581.5912 7⁄162.4382.3562.8152.6161 3⁄321.1160.9780.090.033.53.75
1 3⁄41.751.7851.7162 5⁄82.6252.5383.0312.8931 5⁄321.1961.0540.120.043.754
1 7⁄81.8751.9121.8392 13⁄162.8122.7193.2483.0991 1⁄41.2761.130.120.0444.25
222.0391.964332.93.4643.3061 11⁄321.3881.1750.120.044.254.5
2 1⁄42.252.3052.2143 3⁄83.3753.2623.8973.7191 1⁄21.5481.3270.190.064.755
2 1⁄22.52.5592.4613 3⁄43.753.6254.334.1331 21⁄321.7081.4790.190.065.255.5
2 3⁄42.752.8272.7114 1⁄84.1253.9884.7634.5461 13⁄161.8691.6320.190.065.756
333.0812.9614 1⁄24.54.355.1964.95922.061.8150.190.066.256.5
3 1⁄43.253.3353.214 7⁄84.8754.7125.6295.3722 3⁄162.2511.9360.190.066.757
3 1⁄23.53.5893.4615 1⁄45.255.0756.0625.7862 5⁄162.382.0570.190.067.257.5
3 3⁄43.753.8583.7265 5⁄85.6255.4376.4956.1982 1⁄22.5722.2410.190.067.758
444.1113.975665.86.9286.6122 11⁄162.7642.4240.190.068.258.5

Teflon Coated Stud Bolts Dimensions Chart :

Nominal Size
Diameter, D
inch
Tap End Full
Thread Length,
BM
Umax = 2PMinimum Nut End
Full Thread Length,
Bmin
NominalMin.Max.UNC & NC-5
Thread
UNF Thread8UN ThreadL ≤ 1010
L > 16
1/40.3750.3500.4000.1000.071...0.7501.0001.500
5/160.4690.4400.4980.1110.083--0.8751.1251.625
3/80.5630.5320.5940.1250.083--1.0001.2501.750
7/160.6560.6200.6920.1430.100--1.1251.3751.875
1/20.7500.7080.7920.1540.100--1.2501.5002.000
9/160.8440.8020.8960.1670.111--1.3751.6252.125
5/80.9380.8920.9830.1820.111--1.5001.7502.250
3/41.1.251.0751.1750.2000.125--1.7502.0002.500
7/81.3131.2581.3680.2220.143--2.0002.2502.750
11.5001.4381.5620.2500.167--2.2502.5003.000
1 1/81.6881.6251.7500.2860.1670.2502.5002.7503.250
1 1/41.8751.8131.9380.2860.1670.2502.7503.0003.500
1 3/82.0632.0002.1250.3330.1670.2503.0003.2503.750
1 1/22.2502.1882.3130.3330.1670.2503.2503.5004.000
1 5/82.4382.3752.500----0.2503.5003.7504.250
1 3/42.6252.5632.6880.400--0.2503.7504.0004.500
1 7/82.8132.7502.875----0.2504.0004.2504.750
23.0002.9253.0750.444--0.2504.2504.5005.000
2 1/43.3753.3003.4500.444--0.2504.7505.0005.500
2 1/23.7503.6753.8250.500--0.2505.2505.5006.000
2 3/44.1254.0504.2000.500--0.2505.7506.0006.500
34.5004.4254.5750.500--0.250--6.5007.000
3 1/44.8754.7754.9750.500--0.250--7.0007.500
3 1/25.2505.1505.3500.500--0.250--7.5008.000
3 3/45.6255.5255.7250.500--0.250--8.0008.500
46.0005.9006.1000.500--0.250--8.5009.000

Teflon Coated Nuts Dimensions :

Nominal
Size

inch
Basic Major
Diameter of
Thread
Width Across Flats,
F
Width Across
Corners,
G
Thickness Heavy
Hex Nuts,
H
Thickness Heavy
Hex Jam Nuts,
H1
Maximum Runout of
Bearing Surface to
Thread
Axis, FIM
Heavy HEX NUTSHeavy Hex
Jam Nuts
Specified Proof load
Basic
inch
Min.MaxMin.MaxBasic
inch
Min.MaxBasic
inch
Min.MaxUp to
150,000 psi
150,000 psi
and Greater
All Strength
Levels
1/40.25001/20.4880.5000.5560.57715/640.2180.25011/640.1560.1880.0170.0110.017
5/160.31259/160.5460.5620.6220.65019/640.2800.31413/640.1860.2200.0200.0120.020
3/80.375011/160.6690.6880.7630.79423/640.3410.37715/640.2160.2520.0210.0140.021
7/160.43753/40.7280.7500.8300.86627/640.4030.44117/640.2470.2850.0220.0150.022
1/20.50007/80.8500.8750.9691.01031/640.4640.50419/640.2770.3170.0230.0160.023
9/160.562515/160.9090.9381.0371.08335/640.5260.56821/640.3070.3490.0240.0170.024
5/80.62501 1/161.0311.0621.1751.22739/640.5870.63123/640.3370.3810.0250.0180.025
3/40.75001 1/41.2121.2501.3821.44347/640.7100.75827/640.3980.4460.0270.0200.027
7/80.87501 7/161.3941.4381.5891.66055/640.8330.88531/640.4580.5100.0290.0220.029
11.00001 5/81.5751.6251.7961.87663/640.9561.01235/640.5190.5750.0310.0240.031
1 1/81.12501 13/161.7561.8122.0022.0931 7/641.0791.13939/640.5790.6390.0330.0270.033
1 1/41.250021.9382.0002.2092.3091 7/321.1871.25123/320.6870.7510.0350.0300.035
1 3/81.37502 3/162.1192.1882.4162.5261 11/321.3101.37825/320.7470.8150.0380.0330.038
1 1/21.50002 3/82.3002.3752.6222.7421 15/321.4331.50527/320.8080.8800.0410.0360.041
1 5/81.62502 9/162.4812.5622.8282.9591 19/321.5561.63229/320.8680.9440.0440.0380.044
1 3/41.75002 3/42.6622.7503.0353.1751 23/321.6791.75931/320.9291.0090.0480.0410.048
1 7/81.87502 15/162.8442.9383.2423.3921 27/321.8021.8861 1/320.9891.0730.0510.0440.051
22.00003 1/83.0253.1253.4493.6081 31/321.9252.0131 3/321.0501.1380.0550.0470.055
2 1/42.25003 1/23.3883.5003.8624.0412 13/642.1552.2511 13/641.1551.2510.0610.0520.061
2 1/22.50003 7/83.7503.8754.2754.4742 29/642.4012.5051 29/641.4011.5050.0680.0580.068
2 3/42.75004 1/44.1124.2504.6884.9072 45/642.6472.7591 37/641.5221.6340.0740.0640.074
33.00004 5/84.4754.6255.1025.3402 61/642.8933.0131 45/641.6431.7630.0810.0700.081
3 1/43.250054.8385.0005.5155.7743 3/163.1243.2521 13/161.7481.8760.0870.0750.087
3 1/23.50005 3/85.2005.3755.9286.2073 7/163.3703.5061 15/161.8702.0060.0940.0810.094
3 3/43.75005 3/45.5625.7506.3416.6403 11/163.6163.7602 1/161.9902.1340.1000.0870.100
44.00006 1/85.9256.1256.7557.0733 15/163.8624.0142 3/162.1122.2640.1070.0930.107

Teflon Coated Washer Dimensions Chart :

Nominal SizeTClipped Width E, Min.
I.D.O.D.StandardExtra Thick
[Note (1)]Max.Min.Max.Min.Max.Min.Max.Min.[Note (2)]
1214.4142725.74.63.110810.5
1618.4183432.44.63.110814
2022.5224240.44.63.110817.5
2224.5244442.44.63.410819.2
2426.5265048.44.63.410821
2730.53056S4.14.63.410823.6
3033.6336058.14.63.410826.2
3639.6397270.14.63.410831.S
4245.6458481.87.24.610836.7
4852.7529592.87.24.610842
5662.762107104.88.76.110849
6470.770118115.88.76.110856
7278.778130127.58.76.110863
8086.986142139.58.76.110870
9096.996159156.58.76.110878.7
100107.9107176173.58.76.110887.5

Torque Chart Teflon Coated Fasteners

Diameter (D)Body Diameter (D) Across the Flats (F) Across the Corners © Head Height (H) Thread Lengths (T) 
 MAXMINMAXMINMAXMINMAXMIN<6”>6”
1/20.5150.4820.8750.851.010.9690.3640.3021.251.5
5/80.6420.6051.0621.0311.2271.1750.4440.3781.51.75
3/40.7680.7291.251.2121.4431.3830.5240.4551.752
7/80.8950.8521.4381.3941.661.5890.6040.53122.25
11.0220.9761.6251.5751.8761.7960.70.5912.252.5
1 1/81.1491.0981.8121.7562.0932.0020.780.6582.52.75
1 1/41.2771.22321.9382.3092.2090.8760.7492.753
1 3/81.4041.3452.1882.1192.5262.4160.940.8133.25
1 1/21.5311.472.3752.32.7422.6221.0360.9023.253.5
1 3/41.7851.7162.752.6623.1753.0351.1961.0543.754
22.0391.9643.1253.0253.6083.4491.3881.1754.254.5
2 1/42.3052.2143.53.3884.0413.8621.5481.3274.755
2 1/22.5592.4613.8753.754.4744.2751.7081.4795.255.5
2 3/42.8272.7114.254.1124.9074.6881.8691.6325.756
33.0812.9614.6254.4755.345.1022.061.8156.256.5

Different Types Of Teflon Coated Fasteners

Teflon Coated Fasteners
Different Types Of Fasteners

Application of Teflon Coated Fasteners

Testing of Teflon Coated Fasteners

Packing of Teflon Coated Fasteners

Destination Of Teflon Coated Fasteners