1st Khetwadi Lane, Shop No. 8 Mumbai

Xylan Coated Fasteners

Home » Xylan Coated Fasteners
Get a Quote

Xylan Coated Fasteners, Xylan 1424 Coated Fasteners, Xylan Coated Bolts, Xylan 1070 Coated Square Bolts, Xylan 1014 Coated Hex Bolt, Xylan 1424 Coated Anchor Bolt, Xylan 1070 Coated T-Head Bolts Manufacturer in Mumbai, India.

Xylan Coatings are a type of fluoropolymer coating created to prevent rust on mechanical properties and fasteners. Additionally, these coatings make it easier to apply makeup torque. The term “high-performance coatings” refers to these lubricants, which are waterborne and compatible with volatile organic compounds (VOC), resin bonded, thermally cured, and single dry film formulations. Over the past four decades, offshore engineers have consistently selected Xylan as their first choice material. -420 degrees Fahrenheit to +550 degrees Fahrenheit is the acceptable temperature range for continuous operation. Xylan Coatings Prevent Back Thread Leakage – Pressure vessels, reactor pipelines, storage tanks, fluid containment equipment, pipe unions, and valves are frequently fitted with threaded plugs for checking, pressure relief, filling, or tapping. Xylan coatings prevent back thread leakage.

About Xylan Coated Fasteners

Pipe plugs that have been coated have improved performance and dependability and are much simpler to use. A PTFE (Teflon) tape is typically placed around the threads to seal them. However, a thin layer of Xylan can replace the PTFE (Teflon) tape without affecting the threads’ integrity. In addition, the coating offers protection against corrosion and has low-friction qualities, significantly lowering breakout torques. This enables users to remove the plug later without causing it to be damaged in the process. Whitford provides several variants of industrial Xylan coatings fasteners; each has the desirable characteristics that set it apart from the others. The aqueous and VOC-compatible Xylan 142X Series fastener-class coatings are single-film, thermally cured, resin-bonded, dry-film lubricants and belong to the fastener-class coatings category. The major function of these coatings is to protect fasteners and oil-related items from corrosion and chemical attack by applying them to those surfaces. The Xylan 142X Series, when applied on zinc phosphate steel panels with a dry-film thickness of 1 mil, outperforms the ASTM B-117 salt fog test over 1500 hours. Please refer to the marketing leaflet for Xylan 142X for any more details you require.

The Xylan 1000 series is an excellent choice for various mechanical and industrial applications; this is a partial list of possible uses. In addition, it is commonly acknowledged to be one of the coatings that have had the greatest level of achievement everywhere in the world.

For further information, have a look at the Xylan 1000 Series.

Xylan 1424 – A waterborne dry-film lubricant is built on any material surface that requires lubrication, is suitable with volatile organic compounds (VOCs), and is extremely resistant to corrosion. May reduce Make-up and break-out torques with Xylan 1424, which also provides good resistance to chemicals and abrasion. Like Xylan 1014. A wide variety of hues are accessible to choose from. See the Xylan 1424 Color Chart for further information.

Xylan 1070 – Even after extensive exposure to corrosive conditions, this coating has a high resistance to corrosion and a low coefficient of friction, which allows it to lower the torque required to build up and break out. In addition, Xylan 1070 possesses excellent resistance to wear and abrasion.

Xylan 1014 – Comparable to Xylan 1010, but with a substantially higher proportion of bonding resin to polytetrafluoroethylene (PTFE) lubricant component. It results in a finish that is more durable, resistant to abrasion, glossy, and poreless than the original. The friction values will not change significantly and will continue to be predictable.

Xylan Zinc Rich – Xylan Zinc Rich coated Fasteners like Stud Bolts, Screws Nuts, washers & bolts are commonly used in the Automotive, Construction and Wind Power industries where corrosion resistance is of paramount importance.

With the corrosion resistant Zinc Rich coating, Xylan system advantages can be gained with technical advantages compared to galvanic plating, as well as a one stop shopping service provided by Shree Ashapura Steel Centre

Specification of Xylan Coated Fasteners

SpecificationsIS, ANSI, ASTM DIN, ISO, JIS, GB, ASME, BS, UNI and all International Standards
ThreadsBSF, UNF METRIC, UNC, BSW or as required
StandardM02 to M33ANSI – American National Standards Institute
SS Stud Bolt length are defined in ASME B16.5 standard

ANSI B 28.2.4 1M

ANSI B 18.2.4 2M

ASME B18.5

SS Hex nuts are defined in ASME B18.2.2

DIN: DIN 933, DIN 931, DIN 970, DIN 934

UTS – Unified Thread Standard : UNF, NPT, NPTF, UNS, UNC, UNEF

ISO – International Organization for Standardization ISO 4033, : ISO 4032, JIS standards
Fasteners/ Bolts SizeM10, M4, M16, M36 M2.5, M6, M30, M12, M8, M14, M2, M3, M20, M24, M5 to M160
Length3 mm to 200 mm
Head drivePhillips, Slotted, Phillips/Slot, Six-Lobe etc
Test Certificateas per EN 10204 / 3.1 Manufacturer Test Certificate
FinishingZinc white, (yellow, black, blue), black oxide,
Dacroment, Geometry, plated zinc-nickel, anodizing, nickel plated, Stainless steel: Passivated
Self-Colour, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Sherardized, Stainless Steel, some special one like DACROMET and Mechanically Applied coating
raw materials of SourceJSPL, Usha Martin, Tata Steel, Mukund Steel, RINL, Dhamm Steel etc.
Surface Coating

Xylon Coated Fasteners


PackingIN BULK: pallet, canton, carton / Small Boxs / pallet or customer request

Dimensions Of Xylan Coated Fasteners

Xylan Coated Bolts Dimensions Chart :

Nominal Size
or Basic
Product
Diameter

Full-Size Body
Diameter,
E
Width Across Flats,
F
Width Across
Corners, G
Head Height, H BasicRadius of
Fillet, R
Nominal Thread
Length for Bolt
Lengths,
LT
inchmmMaxMinBasic
inch
MaxMinMaxMinBasic
inch
MaxMinMaxMin6 in. and
Shoter
Over
6 in.
1⁄40.250.260.2377⁄160.4380.4250.5050.48411⁄640.1880.150.030.010.751
5⁄160.31250.3240.2981⁄20.50.4840.5770.5527⁄320.2350.1950.030.010.8751.125
3⁄80.3750.3880.369⁄160.5620.5440.650.621⁄40.2680.2260.030.0111.25
7⁄160.43750.4520.4215⁄80.6250.6030.7220.68719⁄640.3160.2720.030.011.1251.375
1⁄20.50.5150.4823⁄40.750.7250.8660.82611⁄320.3640.3020.030.011.251.5
5⁄80.6250.6420.60515⁄160.9380.9061.0831.03327⁄640.4440.3780.060.021.51.75
3⁄40.750.7680.72911⁄81.1251.0881.2991.241⁄20.5240.4550.060.021.752
7⁄80.8750.8950.8521 5⁄161.3121.2691.5161.44737⁄640.6040.5310.060.0222.25
111.0220.9761 1⁄21.51.451.7321.65343⁄640.70.5910.090.032.252.5
1 1⁄81.1251.1491.0981 11⁄161.6881.6311.9491.8593⁄40.780.6580.090.032.52.75
1 1⁄41.251.2771.2231 7⁄81.8751.8122.1652.06627⁄320.8760.7490.090.032.753
1 3⁄81.3751.4041.3452 1⁄162.0621.9942.3822.27329⁄320.940.810.090.0333.25
1 1⁄21.51.5311.472 1⁄42.252.1752.5982.4811.0360.9020.090.033.253.5
1 5⁄81.6251.6581.5912 7⁄162.4382.3562.8152.6161 3⁄321.1160.9780.090.033.53.75
1 3⁄41.751.7851.7162 5⁄82.6252.5383.0312.8931 5⁄321.1961.0540.120.043.754
1 7⁄81.8751.9121.8392 13⁄162.8122.7193.2483.0991 1⁄41.2761.130.120.0444.25
222.0391.964332.93.4643.3061 11⁄321.3881.1750.120.044.254.5
2 1⁄42.252.3052.2143 3⁄83.3753.2623.8973.7191 1⁄21.5481.3270.190.064.755
2 1⁄22.52.5592.4613 3⁄43.753.6254.334.1331 21⁄321.7081.4790.190.065.255.5
2 3⁄42.752.8272.7114 1⁄84.1253.9884.7634.5461 13⁄161.8691.6320.190.065.756
333.0812.9614 1⁄24.54.355.1964.95922.061.8150.190.066.256.5
3 1⁄43.253.3353.214 7⁄84.8754.7125.6295.3722 3⁄162.2511.9360.190.066.757
3 1⁄23.53.5893.4615 1⁄45.255.0756.0625.7862 5⁄162.382.0570.190.067.257.5
3 3⁄43.753.8583.7265 5⁄85.6255.4376.4956.1982 1⁄22.5722.2410.190.067.758
444.1113.975665.86.9286.6122 11⁄162.7642.4240.190.068.258.5

Xylan Coated Stud Bolts Dimensions Chart :

Nominal Size
Diameter, D
inch
Tap End Full
Thread Length,
BM
Umax = 2PMinimum Nut End
Full Thread Length,
Bmin
NominalMin.Max.UNC & NC-5
Thread
UNF Thread8UN ThreadL ≤ 1010
L > 16
1/40.3750.3500.4000.1000.071...0.7501.0001.500
5/160.4690.4400.4980.1110.083--0.8751.1251.625
3/80.5630.5320.5940.1250.083--1.0001.2501.750
7/160.6560.6200.6920.1430.100--1.1251.3751.875
1/20.7500.7080.7920.1540.100--1.2501.5002.000
9/160.8440.8020.8960.1670.111--1.3751.6252.125
5/80.9380.8920.9830.1820.111--1.5001.7502.250
3/41.1.251.0751.1750.2000.125--1.7502.0002.500
7/81.3131.2581.3680.2220.143--2.0002.2502.750
11.5001.4381.5620.2500.167--2.2502.5003.000
1 1/81.6881.6251.7500.2860.1670.2502.5002.7503.250
1 1/41.8751.8131.9380.2860.1670.2502.7503.0003.500
1 3/82.0632.0002.1250.3330.1670.2503.0003.2503.750
1 1/22.2502.1882.3130.3330.1670.2503.2503.5004.000
1 5/82.4382.3752.500----0.2503.5003.7504.250
1 3/42.6252.5632.6880.400--0.2503.7504.0004.500
1 7/82.8132.7502.875----0.2504.0004.2504.750
23.0002.9253.0750.444--0.2504.2504.5005.000
2 1/43.3753.3003.4500.444--0.2504.7505.0005.500
2 1/23.7503.6753.8250.500--0.2505.2505.5006.000
2 3/44.1254.0504.2000.500--0.2505.7506.0006.500
34.5004.4254.5750.500--0.250--6.5007.000
3 1/44.8754.7754.9750.500--0.250--7.0007.500
3 1/25.2505.1505.3500.500--0.250--7.5008.000
3 3/45.6255.5255.7250.500--0.250--8.0008.500
46.0005.9006.1000.500--0.250--8.5009.000

Xylan Coated Nuts Dimensions :

Nominal
Size

inch
Basic Major
Diameter of
Thread
Width Across Flats,
F
Width Across
Corners,
G
Thickness Heavy
Hex Nuts,
H
Thickness Heavy
Hex Jam Nuts,
H1
Maximum Runout of
Bearing Surface to
Thread
Axis, FIM
Heavy HEX NUTSHeavy Hex
Jam Nuts
Specified Proof load
Basic
inch
Min.MaxMin.MaxBasic
inch
Min.MaxBasic
inch
Min.MaxUp to
150,000 psi
150,000 psi
and Greater
All Strength
Levels
1/40.25001/20.4880.5000.5560.57715/640.2180.25011/640.1560.1880.0170.0110.017
5/160.31259/160.5460.5620.6220.65019/640.2800.31413/640.1860.2200.0200.0120.020
3/80.375011/160.6690.6880.7630.79423/640.3410.37715/640.2160.2520.0210.0140.021
7/160.43753/40.7280.7500.8300.86627/640.4030.44117/640.2470.2850.0220.0150.022
1/20.50007/80.8500.8750.9691.01031/640.4640.50419/640.2770.3170.0230.0160.023
9/160.562515/160.9090.9381.0371.08335/640.5260.56821/640.3070.3490.0240.0170.024
5/80.62501 1/161.0311.0621.1751.22739/640.5870.63123/640.3370.3810.0250.0180.025
3/40.75001 1/41.2121.2501.3821.44347/640.7100.75827/640.3980.4460.0270.0200.027
7/80.87501 7/161.3941.4381.5891.66055/640.8330.88531/640.4580.5100.0290.0220.029
11.00001 5/81.5751.6251.7961.87663/640.9561.01235/640.5190.5750.0310.0240.031
1 1/81.12501 13/161.7561.8122.0022.0931 7/641.0791.13939/640.5790.6390.0330.0270.033
1 1/41.250021.9382.0002.2092.3091 7/321.1871.25123/320.6870.7510.0350.0300.035
1 3/81.37502 3/162.1192.1882.4162.5261 11/321.3101.37825/320.7470.8150.0380.0330.038
1 1/21.50002 3/82.3002.3752.6222.7421 15/321.4331.50527/320.8080.8800.0410.0360.041
1 5/81.62502 9/162.4812.5622.8282.9591 19/321.5561.63229/320.8680.9440.0440.0380.044
1 3/41.75002 3/42.6622.7503.0353.1751 23/321.6791.75931/320.9291.0090.0480.0410.048
1 7/81.87502 15/162.8442.9383.2423.3921 27/321.8021.8861 1/320.9891.0730.0510.0440.051
22.00003 1/83.0253.1253.4493.6081 31/321.9252.0131 3/321.0501.1380.0550.0470.055
2 1/42.25003 1/23.3883.5003.8624.0412 13/642.1552.2511 13/641.1551.2510.0610.0520.061
2 1/22.50003 7/83.7503.8754.2754.4742 29/642.4012.5051 29/641.4011.5050.0680.0580.068
2 3/42.75004 1/44.1124.2504.6884.9072 45/642.6472.7591 37/641.5221.6340.0740.0640.074
33.00004 5/84.4754.6255.1025.3402 61/642.8933.0131 45/641.6431.7630.0810.0700.081
3 1/43.250054.8385.0005.5155.7743 3/163.1243.2521 13/161.7481.8760.0870.0750.087
3 1/23.50005 3/85.2005.3755.9286.2073 7/163.3703.5061 15/161.8702.0060.0940.0810.094
3 3/43.75005 3/45.5625.7506.3416.6403 11/163.6163.7602 1/161.9902.1340.1000.0870.100
44.00006 1/85.9256.1256.7557.0733 15/163.8624.0142 3/162.1122.2640.1070.0930.107

Xylan Coated Washer Dimensions Chart :

Nominal SizeTClipped Width E, Min.
I.D.O.D.StandardExtra Thick
[Note (1)]Max.Min.Max.Min.Max.Min.Max.Min.[Note (2)]
1214.4142725.74.63.110810.5
1618.4183432.44.63.110814
2022.5224240.44.63.110817.5
2224.5244442.44.63.410819.2
2426.5265048.44.63.410821
2730.53056S4.14.63.410823.6
3033.6336058.14.63.410826.2
3639.6397270.14.63.410831.S
4245.6458481.87.24.610836.7
4852.7529592.87.24.610842
5662.762107104.88.76.110849
6470.770118115.88.76.110856
7278.778130127.58.76.110863
8086.986142139.58.76.110870
9096.996159156.58.76.110878.7
100107.9107176173.58.76.110887.5

Torque Chart Xylan Coated Fasteners

Diameter (D)Body Diameter (D) Across the Flats (F) Across the Corners © Head Height (H) Thread Lengths (T) 
 MAXMINMAXMINMAXMINMAXMIN<6”>6”
1/20.5150.4820.8750.851.010.9690.3640.3021.251.5
5/80.6420.6051.0621.0311.2271.1750.4440.3781.51.75
3/40.7680.7291.251.2121.4431.3830.5240.4551.752
7/80.8950.8521.4381.3941.661.5890.6040.53122.25
11.0220.9761.6251.5751.8761.7960.70.5912.252.5
1 1/81.1491.0981.8121.7562.0932.0020.780.6582.52.75
1 1/41.2771.22321.9382.3092.2090.8760.7492.753
1 3/81.4041.3452.1882.1192.5262.4160.940.8133.25
1 1/21.5311.472.3752.32.7422.6221.0360.9023.253.5
1 3/41.7851.7162.752.6623.1753.0351.1961.0543.754
22.0391.9643.1253.0253.6083.4491.3881.1754.254.5
2 1/42.3052.2143.53.3884.0413.8621.5481.3274.755
2 1/22.5592.4613.8753.754.4744.2751.7081.4795.255.5
2 3/42.8272.7114.254.1124.9074.6881.8691.6325.756
33.0812.9614.6254.4755.345.1022.061.8156.256.5

Different Types Of Xylan Coated Fasteners

Xylan Coated Fasteners
Different Types Of Fasteners

Application of Xylan Coated Fasteners

Testing of Xylan Coated Fasteners

Packing of Xylan Coated Fasteners

Destination Of Xylan Coated Fasteners