1st Khetwadi Lane, Shop No. 8 Mumbai

Zinc Plated Fasteners

Home » Zinc Plated Fasteners
Get a Quote

Zinc Plated Fasteners, Stainless Steel 304 Zinc Plated Bolts, Zinc Plated Studs, SS 310 Zinc Plated Stud Bolts, Zinc Plated Threaded Rods, SS 316 Zinc Plated Threaded Bars, Zinc Plated Nuts Manufacturer in Mumbai, India.

Zinc plating and electro-etching are both electro-proof forms; therefore, they are indistinguishable from one another at their most fundamental level. Zinc plating, as opposed to sheet metal, is typically used for finishing small items such as screws, wrench handles, springs, as well as other components. As a disposable zinc terminal, either a cyanide, an antacid that does not include cyanide, or a corrosive chloride salt is supplied to the system. Cyanide showers are the most effective method, despite the fact that they are harmful to the environment and can contribute to pollution.

After the components have been cleaned with a solvent or electrolyte, pickled, and flushed to remove surface oxides, the components are stacked in barrels, racks, or drums before being submerged in a plating system. May add different lighting operators to the solution to increase brightness, but careful management is required to provide a high-quality item. Post-plating medicines can be utilised to passivate the zinc surface, resulting in a different transparent hue or an extension of the coating’s service life. Zinc plating is a process frequently utilised for fasteners such as screws and other small latches, light switch plates, and a variety of other small parts that are subjected to interior environments or fairly harmful situations. Extra protection against corrosion is provided by a chromate-change coating, which must be applied to the material before it can be used in situations that are moderate or severe.

About Zinc Plated Fasteners

THE PROCESS OF ZINC PLATING

The rust or surface scales are removed from the metal by cleaning the surface with a fundamental cleaner and then treating it with a corrosive. When electroplating zinc, cleanliness is essential because oil molecules can stop the coating from layering or corroding if they come into contact with it.

The metal is then submerged in a synthetic shower filled with fragments of zinc before the following step of the process, which is the deposition of zinc onto the metal. Zinc is then placed on the cathode due to the application of a direct current. Finished items, particularly those with recesses, sometimes use soluble zinc showers to achieve a consistent zinc thickness progressively.

Because there is less corrosion of the zinc that has been deposited, this results in a more extended guarantee period from the point of consumption. A zinc coating can significantly extend the time needed for a white rust system to form. Sealants, presently often recommended by the automotive industry, are applied to finished items as well, further extending the erosion protection they provide.

Specification of Zinc Plated Fasteners

SpecificationsIS, ANSI, ASTM DIN, ISO, JIS, GB, ASME, BS, UNI and all International Standards
ThreadsBSF, UNF METRIC, UNC, BSW or as required
StandardM02 to M33ANSI – American National Standards Institute
SS Stud Bolt length are defined in ASME B16.5 standard

ANSI B 28.2.4 1M

ANSI B 18.2.4 2M

ASME B18.5

SS Hex nuts are defined in ASME B18.2.2

DIN: DIN 933, DIN 931, DIN 970, DIN 934

UTS – Unified Thread Standard : UNF, NPT, NPTF, UNS, UNC, UNEF

ISO – International Organization for Standardization ISO 4033, : ISO 4032, JIS standards
Fasteners/ Bolts SizeM10, M4, M16, M36 M2.5, M6, M30, M12, M8, M14, M2, M3, M20, M24, M5 to M160
Length3 mm to 200 mm
Head drivePhillips, Slotted, Phillips/Slot, Six-Lobe etc
Test Certificateas per EN 10204 / 3.1 Manufacturer Test Certificate
FinishingZinc white, (yellow, black, blue), black oxide,
Dacroment, Geometry, plated zinc-nickel, anodizing, nickel plated, Stainless steel: Passivated
Self-Colour, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Sherardized, Stainless Steel, some special one like DACROMET and Mechanically Applied coating
raw materials of SourceJSPL, Usha Martin, Tata Steel, Mukund Steel, RINL, Dhamm Steel etc.
Surface Coating

Zinc Plated Fasteners


PackingIN BULK: pallet, canton, carton / Small Boxs / pallet or customer request

Dimensions Of Zinc Plated Fasteners

Zinc Plated Bolts Dimensions Chart :

Nominal Size
or Basic
Product
Diameter

Full-Size Body
Diameter,
E
Width Across Flats,
F
Width Across
Corners, G
Head Height, H BasicRadius of
Fillet, R
Nominal Thread
Length for Bolt
Lengths,
LT
inchmmMaxMinBasic
inch
MaxMinMaxMinBasic
inch
MaxMinMaxMin6 in. and
Shoter
Over
6 in.
1⁄40.250.260.2377⁄160.4380.4250.5050.48411⁄640.1880.150.030.010.751
5⁄160.31250.3240.2981⁄20.50.4840.5770.5527⁄320.2350.1950.030.010.8751.125
3⁄80.3750.3880.369⁄160.5620.5440.650.621⁄40.2680.2260.030.0111.25
7⁄160.43750.4520.4215⁄80.6250.6030.7220.68719⁄640.3160.2720.030.011.1251.375
1⁄20.50.5150.4823⁄40.750.7250.8660.82611⁄320.3640.3020.030.011.251.5
5⁄80.6250.6420.60515⁄160.9380.9061.0831.03327⁄640.4440.3780.060.021.51.75
3⁄40.750.7680.72911⁄81.1251.0881.2991.241⁄20.5240.4550.060.021.752
7⁄80.8750.8950.8521 5⁄161.3121.2691.5161.44737⁄640.6040.5310.060.0222.25
111.0220.9761 1⁄21.51.451.7321.65343⁄640.70.5910.090.032.252.5
1 1⁄81.1251.1491.0981 11⁄161.6881.6311.9491.8593⁄40.780.6580.090.032.52.75
1 1⁄41.251.2771.2231 7⁄81.8751.8122.1652.06627⁄320.8760.7490.090.032.753
1 3⁄81.3751.4041.3452 1⁄162.0621.9942.3822.27329⁄320.940.810.090.0333.25
1 1⁄21.51.5311.472 1⁄42.252.1752.5982.4811.0360.9020.090.033.253.5
1 5⁄81.6251.6581.5912 7⁄162.4382.3562.8152.6161 3⁄321.1160.9780.090.033.53.75
1 3⁄41.751.7851.7162 5⁄82.6252.5383.0312.8931 5⁄321.1961.0540.120.043.754
1 7⁄81.8751.9121.8392 13⁄162.8122.7193.2483.0991 1⁄41.2761.130.120.0444.25
222.0391.964332.93.4643.3061 11⁄321.3881.1750.120.044.254.5
2 1⁄42.252.3052.2143 3⁄83.3753.2623.8973.7191 1⁄21.5481.3270.190.064.755
2 1⁄22.52.5592.4613 3⁄43.753.6254.334.1331 21⁄321.7081.4790.190.065.255.5
2 3⁄42.752.8272.7114 1⁄84.1253.9884.7634.5461 13⁄161.8691.6320.190.065.756
333.0812.9614 1⁄24.54.355.1964.95922.061.8150.190.066.256.5
3 1⁄43.253.3353.214 7⁄84.8754.7125.6295.3722 3⁄162.2511.9360.190.066.757
3 1⁄23.53.5893.4615 1⁄45.255.0756.0625.7862 5⁄162.382.0570.190.067.257.5
3 3⁄43.753.8583.7265 5⁄85.6255.4376.4956.1982 1⁄22.5722.2410.190.067.758
444.1113.975665.86.9286.6122 11⁄162.7642.4240.190.068.258.5

Zinc Plated Stud Bolts Dimensions Chart :

Nominal Size
Diameter, D
inch
Tap End Full
Thread Length,
BM
Umax = 2PMinimum Nut End
Full Thread Length,
Bmin
NominalMin.Max.UNC & NC-5
Thread
UNF Thread8UN ThreadL ≤ 1010
L > 16
1/40.3750.3500.4000.1000.071...0.7501.0001.500
5/160.4690.4400.4980.1110.083--0.8751.1251.625
3/80.5630.5320.5940.1250.083--1.0001.2501.750
7/160.6560.6200.6920.1430.100--1.1251.3751.875
1/20.7500.7080.7920.1540.100--1.2501.5002.000
9/160.8440.8020.8960.1670.111--1.3751.6252.125
5/80.9380.8920.9830.1820.111--1.5001.7502.250
3/41.1.251.0751.1750.2000.125--1.7502.0002.500
7/81.3131.2581.3680.2220.143--2.0002.2502.750
11.5001.4381.5620.2500.167--2.2502.5003.000
1 1/81.6881.6251.7500.2860.1670.2502.5002.7503.250
1 1/41.8751.8131.9380.2860.1670.2502.7503.0003.500
1 3/82.0632.0002.1250.3330.1670.2503.0003.2503.750
1 1/22.2502.1882.3130.3330.1670.2503.2503.5004.000
1 5/82.4382.3752.500----0.2503.5003.7504.250
1 3/42.6252.5632.6880.400--0.2503.7504.0004.500
1 7/82.8132.7502.875----0.2504.0004.2504.750
23.0002.9253.0750.444--0.2504.2504.5005.000
2 1/43.3753.3003.4500.444--0.2504.7505.0005.500
2 1/23.7503.6753.8250.500--0.2505.2505.5006.000
2 3/44.1254.0504.2000.500--0.2505.7506.0006.500
34.5004.4254.5750.500--0.250--6.5007.000
3 1/44.8754.7754.9750.500--0.250--7.0007.500
3 1/25.2505.1505.3500.500--0.250--7.5008.000
3 3/45.6255.5255.7250.500--0.250--8.0008.500
46.0005.9006.1000.500--0.250--8.5009.000

Zinc Plated Nuts Dimensions :

Nominal
Size

inch
Basic Major
Diameter of
Thread
Width Across Flats,
F
Width Across
Corners,
G
Thickness Heavy
Hex Nuts,
H
Thickness Heavy
Hex Jam Nuts,
H1
Maximum Runout of
Bearing Surface to
Thread
Axis, FIM
Heavy HEX NUTSHeavy Hex
Jam Nuts
Specified Proof load
Basic
inch
Min.MaxMin.MaxBasic
inch
Min.MaxBasic
inch
Min.MaxUp to
150,000 psi
150,000 psi
and Greater
All Strength
Levels
1/40.25001/20.4880.5000.5560.57715/640.2180.25011/640.1560.1880.0170.0110.017
5/160.31259/160.5460.5620.6220.65019/640.2800.31413/640.1860.2200.0200.0120.020
3/80.375011/160.6690.6880.7630.79423/640.3410.37715/640.2160.2520.0210.0140.021
7/160.43753/40.7280.7500.8300.86627/640.4030.44117/640.2470.2850.0220.0150.022
1/20.50007/80.8500.8750.9691.01031/640.4640.50419/640.2770.3170.0230.0160.023
9/160.562515/160.9090.9381.0371.08335/640.5260.56821/640.3070.3490.0240.0170.024
5/80.62501 1/161.0311.0621.1751.22739/640.5870.63123/640.3370.3810.0250.0180.025
3/40.75001 1/41.2121.2501.3821.44347/640.7100.75827/640.3980.4460.0270.0200.027
7/80.87501 7/161.3941.4381.5891.66055/640.8330.88531/640.4580.5100.0290.0220.029
11.00001 5/81.5751.6251.7961.87663/640.9561.01235/640.5190.5750.0310.0240.031
1 1/81.12501 13/161.7561.8122.0022.0931 7/641.0791.13939/640.5790.6390.0330.0270.033
1 1/41.250021.9382.0002.2092.3091 7/321.1871.25123/320.6870.7510.0350.0300.035
1 3/81.37502 3/162.1192.1882.4162.5261 11/321.3101.37825/320.7470.8150.0380.0330.038
1 1/21.50002 3/82.3002.3752.6222.7421 15/321.4331.50527/320.8080.8800.0410.0360.041
1 5/81.62502 9/162.4812.5622.8282.9591 19/321.5561.63229/320.8680.9440.0440.0380.044
1 3/41.75002 3/42.6622.7503.0353.1751 23/321.6791.75931/320.9291.0090.0480.0410.048
1 7/81.87502 15/162.8442.9383.2423.3921 27/321.8021.8861 1/320.9891.0730.0510.0440.051
22.00003 1/83.0253.1253.4493.6081 31/321.9252.0131 3/321.0501.1380.0550.0470.055
2 1/42.25003 1/23.3883.5003.8624.0412 13/642.1552.2511 13/641.1551.2510.0610.0520.061
2 1/22.50003 7/83.7503.8754.2754.4742 29/642.4012.5051 29/641.4011.5050.0680.0580.068
2 3/42.75004 1/44.1124.2504.6884.9072 45/642.6472.7591 37/641.5221.6340.0740.0640.074
33.00004 5/84.4754.6255.1025.3402 61/642.8933.0131 45/641.6431.7630.0810.0700.081
3 1/43.250054.8385.0005.5155.7743 3/163.1243.2521 13/161.7481.8760.0870.0750.087
3 1/23.50005 3/85.2005.3755.9286.2073 7/163.3703.5061 15/161.8702.0060.0940.0810.094
3 3/43.75005 3/45.5625.7506.3416.6403 11/163.6163.7602 1/161.9902.1340.1000.0870.100
44.00006 1/85.9256.1256.7557.0733 15/163.8624.0142 3/162.1122.2640.1070.0930.107

Zinc Plated Washer Dimensions Chart :

Nominal SizeTClipped Width E, Min.
I.D.O.D.StandardExtra Thick
[Note (1)]Max.Min.Max.Min.Max.Min.Max.Min.[Note (2)]
1214.4142725.74.63.110810.5
1618.4183432.44.63.110814
2022.5224240.44.63.110817.5
2224.5244442.44.63.410819.2
2426.5265048.44.63.410821
2730.53056S4.14.63.410823.6
3033.6336058.14.63.410826.2
3639.6397270.14.63.410831.S
4245.6458481.87.24.610836.7
4852.7529592.87.24.610842
5662.762107104.88.76.110849
6470.770118115.88.76.110856
7278.778130127.58.76.110863
8086.986142139.58.76.110870
9096.996159156.58.76.110878.7
100107.9107176173.58.76.110887.5

Torque Chart Zinc Plated Fasteners

Diameter (D)Body Diameter (D) Across the Flats (F) Across the Corners © Head Height (H) Thread Lengths (T) 
 MAXMINMAXMINMAXMINMAXMIN<6”>6”
1/20.5150.4820.8750.851.010.9690.3640.3021.251.5
5/80.6420.6051.0621.0311.2271.1750.4440.3781.51.75
3/40.7680.7291.251.2121.4431.3830.5240.4551.752
7/80.8950.8521.4381.3941.661.5890.6040.53122.25
11.0220.9761.6251.5751.8761.7960.70.5912.252.5
1 1/81.1491.0981.8121.7562.0932.0020.780.6582.52.75
1 1/41.2771.22321.9382.3092.2090.8760.7492.753
1 3/81.4041.3452.1882.1192.5262.4160.940.8133.25
1 1/21.5311.472.3752.32.7422.6221.0360.9023.253.5
1 3/41.7851.7162.752.6623.1753.0351.1961.0543.754
22.0391.9643.1253.0253.6083.4491.3881.1754.254.5
2 1/42.3052.2143.53.3884.0413.8621.5481.3274.755
2 1/22.5592.4613.8753.754.4744.2751.7081.4795.255.5
2 3/42.8272.7114.254.1124.9074.6881.8691.6325.756
33.0812.9614.6254.4755.345.1022.061.8156.256.5

Different Types Of Zinc Plated Fasteners

Different Types Of Fasteners

Application of Zinc Plated Fasteners

Testing of Zinc Plated Fasteners

Packing of Zinc Plated Fasteners

Destination Of Zinc Plated Fasteners